Ah, yeah, I forgot to mention that. 16 watts sounds about right... I'd figure 18 to be safe.
On Fri, Feb 16, 2018 at 12:06 PM, Darin Steffl <darin.ste...@mnwifi.com> wrote: > 2000 definitely has a heater in it for startup if it's too cold. This only > powers on during power up if the radio has been offline and is below a > certain temperature. It only runs run 2 minutes or less in our experience > until a certain internal temp is reached. We see about 16 watts usage with > the heater on. 6 to 8 watts otherwise during normal operation. > > On Feb 16, 2018 1:02 PM, "Chris Fabien" <ch...@lakenetmi.com> wrote: > >> Make sure to check if the ePMP 2000 has a cold start heater like the 1000 >> does - that tripped us up a couple times. >> >> On Fri, Feb 16, 2018 at 10:53 AM, Sam Lambie <samtaos...@gmail.com> >> wrote: >> >>> Thanks Mathew >>> >>> On Thu, Feb 15, 2018 at 5:33 PM, Mathew Howard <mhoward...@gmail.com> >>> wrote: >>> >>>> Typically 8-10 watts, from what I've seen. >>>> >>>> On Thu, Feb 15, 2018 at 5:33 PM, Sam Lambie <samtaos...@gmail.com> >>>> wrote: >>>> >>>>> Hey all, >>>>> >>>>> Has anyone cared to note what the real wattage draw of the AP is under >>>>> load? I have a solar site that is getting close to full power wise and am >>>>> looking to put something in that is light on juice. >>>>> >>>>> thanks >>>>> Sam >>>>> >>>>> -- >>>>> -- >>>>> *Sam Lambie* >>>>> Taosnet Wireless Tech. >>>>> 575-758-7598 <(575)%20758-7598> Office >>>>> www.Taosnet.com <http://www.newmex.com> >>>>> >>>> >>>> >>> >>> >>> -- >>> -- >>> *Sam Lambie* >>> Taosnet Wireless Tech. >>> 575-758-7598 <(575)%20758-7598> Office >>> www.Taosnet.com <http://www.newmex.com> >>> >> >>
