But those appear to be backwards for what Steve is doing... On Thu, Apr 19, 2018 at 2:46 PM, <[email protected]> wrote:
> OK, so again, you do realize I have a whole product line for angle iron, > right? > > *From:* Steve Jones > *Sent:* Thursday, April 19, 2018 1:43 PM > *To:* [email protected] > *Subject:* Re: [AFMUG] MTOW clamps > > no, this is for mounting to angle iron. I put a pipe inside for clamp grip > > On Thu, Apr 19, 2018 at 2:41 PM, <[email protected]> wrote: > >> So you are adding an piece of angle iron to a round tower leg? >> I presume y’all know about these: >> https://www.mccowntech.com/product-category/tower-mounts-acc >> essories/angle-iron-tower-leg-mounting-accessories/ >> >> *From:* Steve Jones >> *Sent:* Thursday, April 19, 2018 1:37 PM >> *To:* [email protected] >> *Subject:* Re: [AFMUG] MTOW clamps >> >> >> >> >> On Thu, Apr 19, 2018 at 9:54 AM, <[email protected]> wrote: >> >>> The M-TOW-P-48 is not an angle iron part. If that is what you ordered >>> that is not what got shipped. >>> >>> -----Original Message----- From: Seth Mattinen >>> Sent: Wednesday, April 18, 2018 8:24 PM >>> To: [email protected] >>> Subject: Re: [AFMUG] MTOW clamps >>> >>> On 4/18/18 7:16 PM, Chuck McCown wrote: >>> >>>> The M-TOW products that are made for angle iron tower legs have a flat >>>> back clamp. But the others are still the curved clamp. We could have had >>>> a packing error in final assembly I suppose. >>>> >>> >>> >>> Oh, then I got the wrong one, I've never seen the angle iron tower ones. >>> Ordered from Streakwave. M-TOW-P-48 >>> >> >> > >
