In the beginning they were called TOW-M but someone reversed it somewhere and
it stuck.
From: Bill Prince
Sent: Thursday, April 19, 2018 2:01 PM
To: Motorola III
Subject: Re: [AFMUG] MTOW clamps
I thought it was mcown tower.
;-)
--
bp
part15sbs{at}gmail{dot}com
On Thu, Apr 19, 2018 at 12:57 PM, <[email protected]> wrote:
Our angle mounts also have the V notch that rests against the angle iron.
From: Adam Moffett
Sent: Thursday, April 19, 2018 1:47 PM
To: [email protected]
Subject: Re: [AFMUG] MTOW clamps
Other way around. Angled tower leg, he's backing the angle with a piece of
pipe so he can't crush the angle. Using your bent clamp on the back so it goes
against the pipe and the site pro piece on the front because it has a V-notch
that will rest in the angle iron.
------ Original Message ------
From: [email protected]
To: [email protected]
Sent: 4/19/2018 3:41:24 PM
Subject: Re: [AFMUG] MTOW clamps
So you are adding an piece of angle iron to a round tower leg?
I presume y’all know about these:
https://www.mccowntech.com/product-category/tower-mounts-accessories/angle-iron-tower-leg-mounting-accessories/
From: Steve Jones
Sent: Thursday, April 19, 2018 1:37 PM
To: [email protected]
Subject: Re: [AFMUG] MTOW clamps
On Thu, Apr 19, 2018 at 9:54 AM, <[email protected]> wrote:
The M-TOW-P-48 is not an angle iron part. If that is what you ordered
that is not what got shipped.
-----Original Message----- From: Seth Mattinen
Sent: Wednesday, April 18, 2018 8:24 PM
To: [email protected]
Subject: Re: [AFMUG] MTOW clamps
On 4/18/18 7:16 PM, Chuck McCown wrote:
The M-TOW products that are made for angle iron tower legs have a flat
back clamp. But the others are still the curved clamp. We could have had a
packing error in final assembly I suppose.
Oh, then I got the wrong one, I've never seen the angle iron tower ones.
Ordered from Streakwave. M-TOW-P-48
