If I leave it at 0.0.0.0 it should update from any IP right? On Thu, Apr 19, 2018 at 7:02 PM, Philip Rankin <wireless...@gmail.com> wrote:
> Sam, there used to be a field on the front page of the cambium software > that set out the upgrade IP address of the computer that was upgrading the > subscriber bottle. That has to be sent to the correct IP of the upgrading > computer or at least the network. Good luck > > On Thu, Apr 19, 2018 at 4:16 PM Sam Lambie <samtaos...@gmail.com> wrote: > >> Hey all, I am using a NAT'd computer on our work lan and can access all >> the AP's from this box. However, when I enable auto update to upgrade the >> SM's first, Nothing happens. It used to work fine and in the past few >> months it has not. >> Any suggestions? >> >> >> -- >> -- >> *Sam Lambie* >> Taosnet Wireless Tech. >> 575-758-7598 Office >> www.Taosnet.com <http://www.newmex.com> >> > -- > Phil > > Philip J. Rankin, CEO > Wireless Telecommunications, Corp. > A division of; > Mobilcom Wireless Services > PO Box 24 > Pittsburg, KS 66762 > 620-231-8188 > -- -- *Sam Lambie* Taosnet Wireless Tech. 575-758-7598 Office www.Taosnet.com <http://www.newmex.com>