Eh...

There are 6400mils in a circle, compared to 360 degrees.

Much more accurate.

Signed, a former artillery/mortar/CAS guy

On Wed, Apr 25, 2018, 9:55 AM Robert <[email protected]> wrote:

> Long distance shooting talk...
>
> On 4/25/18 7:05 AM, castarritt wrote:
> > 5 milliradian would be ~0.3°
> >
> > On Tue, Apr 24, 2018 at 6:24 PM, <[email protected]
> > <mailto:[email protected]>> wrote:
> >
> >     Not huge if you consider most of the main lobes are that wide or
> >     wider, so just as long as you can get it close enough to tweak with
> >     signal levels, that is all you need.
> >     If you are thinking of a set it and forget it, a tenth of a degree
> >     would be needed for that.  Depending on frequency and gain of course.
> >     5 mil meaning?
> >     *From:* Josh Reynolds
> >     *Sent:* Tuesday, April 24, 2018 5:11 PM
> >     *To:* [email protected]
> >     *Subject:* Re: [AFMUG] SunSight MW15
> >     Get it down to 5mil accuracy and then we are talking! :) 1deg is
> huge!
> >     On Tue, Apr 24, 2018, 12:53 PM <[email protected]> wrote:
> >
> >         $15K
> >         One of my sons worked on doing something similar all last
> >         summer. He ran out of time before we finished it.  We got down
> >         to about 1 degree azimuth accuracy.  Maybe we will finish it
> >         someday.
> >         *From:* Jaime Solorza
> >         *Sent:* Tuesday, April 24, 2018 11:50 AM
> >         *To:* Animal Farm
> >         *Subject:* Re: [AFMUG] SunSight MW15
> >         I just video last week..how much are they?
> >
> >         Jaime Solorza
> >         On Tue, Apr 24, 2018, 11:45 AM Joshua Heide
> >         <[email protected]> wrote:
> >
> >             Wanted to see if anyone had any experience using these
> >             alignment tools? If so would you recommend this product over
> >             others brands out there? besides the buying new directly
> >             from the manufacturer is there another good place to buy one
> >             or find a used one?
> >
> >             Thanks for the help!
> >
> >             Josh
> >
> >
>

Reply via email to