I had some of those too... I got them from Streakwave, around March, I think (although it's possible those were ones I had sitting here for awhile, and I got different ones then... I don't know for certain).
On Mon, May 7, 2018 at 11:12 AM, Chuck McCown <[email protected]> wrote: > Odd, we have not made those thin cards since last summer and only for a > very short lived REV. > The jacks were so tall that even with the thin cards and removing some of > the jack shield there was still a danger of touching the adjacent card. So > we went back to the older jacks. > > Wonder who you got them from as that is pretty old stock. I will replace > them if you want. > > *From:* Josh Luthman > *Sent:* Monday, May 07, 2018 10:05 AM > *To:* [email protected] > *Subject:* [AFMUG] APC surge cards board size > > Did anyone else notice the newest cards are much thinner than the new > ones? They slide in/out of the WBMFG APC case a whole lot easier. We did > check a couple to make sure we had continuity from the shield to ground, so > at least it's making connection still. > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > <https://maps.google.com/?q=1100+Wayne+St+Suite+1337+Troy,+OH+%0D%0A45373&entry=gmail&source=g> > Suite 1337 > <https://maps.google.com/?q=1100+Wayne+St+Suite+1337+Troy,+OH+%0D%0A45373&entry=gmail&source=g> > Troy, OH 45373 >
