A 1" conduit bulkhead connector will do the trick. Attach a short length
of conduit on the outside with a sweep.
If the nipple on the bulkhead connector is not long enough, you can get
longer nipples at any hardware store (1" though 3 or 4 inches).
bp
<part15sbs{at}gmail{dot}com>
On 5/25/2018 1:43 PM, Mike Davis wrote:
Any suggestions on where to get a cable wall pass-through for a 1/2"
steel plate? I am out of ideas of where to try. I need to get 6 cat
cables from the inside of a water tower to the outside at the top of
the tower.
--
*Mike Davis*
General Manager
Office: 260-349-1799
Email: [email protected]
<mailto:[email protected]>_
*Alliance Internet Communications* | www.allianceinternet.net
<http://www.allianceinternet.net>
PO Box 1100 | 1220 South Wayne Street | Angola, IN | 46703 | 260-349-1799
