George Graves wrote:
George Graves
'86 GTV-6 3.0 'S'
On Feb 26, 2010, at 1:42 PM, George Graves wrote:
Can't say DEFINITELY, BUT, I do know that they use the same tappet
spacer kit, so this suggests that the buckets between the valves and
the cam lobes are identical (if that's what you mean by cam followers).
George Graves
'86 GTV-6 3.0 'S'
NO, they are NOT the same. The 2600 followers are a larger diameter than
the 105's.
In fact, the above statement about the adjusting shims is only HALF
true. One side of a 2600 uses the same shims as a 105, the other side
has valve stems which are 1 mm larger in diameter, and therefore uses
different shims. Don't ask me WHICH side is larger right now, don't
recall for sure, but I think it's the exhausts.
Greg
On Feb 26, 2010, at 1:16 PM, Watry, Andrew (LNG-SFR) wrote:
Cam someone say definitively if 2600 cam followers the same as 101-115
cars? Thanks
Andrew
--
to be removed from alfa, see http://www.digest.net/bin/digest-subs.cgi
or email "unsubscribe alfa" to [email protected]
