OK. That makes sense.
George Graves
'86 GTV-6 3.0 'S'
On Feb 26, 2010, at 2:05 PM, Greg Hermann wrote:
George Graves wrote:
George Graves
'86 GTV-6 3.0 'S'
On Feb 26, 2010, at 1:42 PM, George Graves wrote:
Can't say DEFINITELY, BUT, I do know that they use the same tappet
spacer kit, so this suggests that the buckets between the valves
and the cam lobes are identical (if that's what you mean by cam
followers).
George Graves
'86 GTV-6 3.0 'S'
NO, they are NOT the same. The 2600 followers are a larger diameter
than the 105's.
In fact, the above statement about the adjusting shims is only HALF
true. One side of a 2600 uses the same shims as a 105, the other
side has valve stems which are 1 mm larger in diameter, and
therefore uses different shims. Don't ask me WHICH side is larger
right now, don't recall for sure, but I think it's the exhausts.
Greg
On Feb 26, 2010, at 1:16 PM, Watry, Andrew (LNG-SFR) wrote:
Cam someone say definitively if 2600 cam followers the same as
101-115
cars? Thanks
Andrew
--
to be removed from alfa, see http://www.digest.net/bin/digest-subs.cgi
or email "unsubscribe alfa" to [email protected]
