Cats: After some much needed rewiring and general wire cleanup behind the dash of my 74 GTV, I'm about to put the dash back in the car. I have a couple of questions about the hand throttle cable for anyone that has had these apart before.
When I took it off, I disconnected it from the engine bay and pulled the dash out, leaving it connected to the dash handle. Now I'm wondering how this cable winds its way through the space to get to the grommet hole. Does it go over or under the steering column? How would one recommend getting it back on too? Should I feed it through the opposite of removal? Or should I disconnect it from the handle and feed it through from the engine bay and reconnect it to the handle on the dash? Also, this little mechanism in the engine bay. It was attached to the end of the cable in the engine bay, but wasn't attached to anything. It appears to secure the end of the cable to the brake booster, but I don't know exactly how. If anyone has some details, I'd appreciate it very much. Here are some pictures of the mechanism that was in the engine bay near the brake booster: http://picasaweb.google.com/iachella/MiscAlfa#5465362984510633906 http://picasaweb.google.com/iachella/MiscAlfa#5465362989362300226 Thanks, Stefano Concord, CA -- to be removed from alfa, see http://www.digest.net/bin/digest-subs.cgi or email "unsubscribe alfa" to [email protected]
