I don’t think so. As soon as I select use as Sound Device from the recorder I get the “Not Enough Power” message which I’ve seen on other devices before.
> On 22 Jul 2019, at 9:53 pm, Aidan <[email protected]> wrote: > > Well, the way I understand it is that with ios, you con't just select > that and off you go, there are more options under the ios section once > you pressed ok on that. Maybe that's the problem. > > On 7/21/19, Dane Trethowan <[email protected]> wrote: >> I’m doing some tests with the recorder at the moment. >> Unfortunately I can’t get the recorder to work as a microphone with the >> iPhone or iPad mini. >> The battery of the iPad Pro was dead flat so I haven’t ben able to try that >> though I suspect the results will be the same which is a pity. >> >> >>> On 22 Jul 2019, at 6:49 am, Aidan <[email protected]> wrote: >>> >>> I agree. I won't use that allot, but its good to no how to turn it >>> on/off. >>> >>> On 7/21/19, Dane Trethowan <[email protected]> wrote: >>>> I haven't worked that out yet but I will. >>>> I should draw your attention to a few things. >>>> The Pre-Record buffer is only 2 seconds in length. >>>> The buffer may not always work depending on what function of recording >>>> you >>>> are using, it will not work with the "Countdown Timer" function I think >>>> its >>>> call. >>>> Given that this recorder is priced as low as it is these minor oddities >>>> seem >>>> a fair tradeoff and don't affect the recorders prime aim which is to >>>> make >>>> some damn decent quality recordings. >>>> >>>> >>>> -----Original Message----- >>>> From: [email protected] <[email protected]> On Behalf Of Aidan >>>> Sent: Sunday, 21 July 2019 11:56 PM >>>> To: [email protected] >>>> Subject: Re: [all-audio] Getting my Mac to recognize Zoom H1N as >>>> external >>>> drive >>>> >>>> So, could you figure out how to get pre record switched on or off, and >>>> when >>>> play back, things like repeat and AB repeat and playback speed? >>>> The manual dos not clearly state button combinations there. >>>> >>>> On 7/18/19, Dane Trethowan <[email protected]> wrote: >>>>> As far as I know the only other option available might be for actually >>>>> powering the device itself. >>>>> There's no trouble in using the H1N with an IOS device for input and >>>>> output. >>>>> >>>>> >>>>> -----Original Message----- >>>>> From: [email protected] <[email protected]> On Behalf Of Aidan >>>>> Sent: Friday, 19 July 2019 1:29 AM >>>>> To: [email protected] >>>>> Subject: Re: [all-audio] Getting my Mac to recognize Zoom H1N as >>>>> external drive >>>>> >>>>> Thanks dain this is what I always wanted to know. Do you perhaps no if >>>>> there are other options on that USB screen, and how it will work when >>>>> connecting it to ios for sound use. >>>>> >>>>> On 7/17/19, Dane Trethowan <[email protected]> wrote: >>>>>> Okay here’s what you do. >>>>>> You first need to turn the power on for the H1N recorder and wait >>>>>> until the recorder is booted. >>>>>> Then connect the USB cable from the recorder to the computer. >>>>>> At this point the USB connection screen displays on the recorder. >>>>>> Here’s where you need to use the 4 keys below the display mentioned >>>>>> previously so to get to Card Reader press `Limiter key - that’s the >>>>>> 3rd key from the left - and then press Auto level key - that’s the >>>>>> right most key on the row, the forth. - You should now be able to use >>>>>> the recorder as a USB Card reader. >>>>>> When finished make sure to “Safely Eject” the H1N from your computer >>>>>> system in which ever way your computer handles it. >>>>>> Now going back to the USB screen for a moment. >>>>>> If you press the Auto Level key twice then you will set the recorder >>>>>> to USB Sound Device mode. >>>>>> I’ve tried all this on both a Mac and Windows machine. >>>>>> Hope this helps. >>>>>> >>>>>> >>>>>>> On 17 Jul 2019, at 10:36 pm, Mike Busboom <[email protected]> wrote: >>>>>>> >>>>>>> Hi everyone, >>>>>>> >>>>>>> can someone tell me how to get my Mac or PC to recognize my Zoom H1N >>>>>>> as a hard drive? >>>>>>> >>>>>>> In terms of nomenclature, I call the horizontal buttons immediately >>>>>>> below the display, from left to right, H1 through H4. I call the >>>>>>> buttons below the Record button, B1 through B4, with B1 and B2 in >>>>>>> the top row and B3 and >>>>>>> B4 on the bottom row. >>>>>>> >>>>>>> What key combination do I need to press in order to make either a >>>>>>> Mac or PC recognize the H1N as a hard drive? >>>>>>> >>>>>>> Thanks and all the best, >>>>>>> >>>>>>> Mike >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>> >>> >>> >> >> >> >> >> > > > -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#2559): https://groups.io/g/all-audio/message/2559 Mute This Topic: https://groups.io/mt/32502774/21656 Group Owner: [email protected] Unsubscribe: https://groups.io/g/all-audio/leave/1074140/405281159/xyzzy [[email protected]] -=-=-=-=-=-=-=-=-=-=-=-
