Could be yes. Just tell me something else, did you manage the first screens once you insert batteries, and wich battery type did you select?
On 7/22/19, Dane Trethowan <[email protected]> wrote: > Yes you’re absolutely right so I’m wondering if I have a faulty camera kit > here? Camera Kits aren’t expensive items so I’ll order another in a couple > of days. > > >> On 23 Jul 2019, at 12:08 am, Aidan <[email protected]> wrote: >> >> Intresting, as the manual do state it can work with ios. >> >> On 7/22/19, Dane Trethowan <[email protected]> wrote: >>> I don’t think so. >>> As soon as I select use as Sound Device from the recorder I get the “Not >>> Enough Power” message which I’ve seen on other devices before. >>> >>> >>>> On 22 Jul 2019, at 9:53 pm, Aidan <[email protected]> wrote: >>>> >>>> Well, the way I understand it is that with ios, you con't just select >>>> that and off you go, there are more options under the ios section once >>>> you pressed ok on that. Maybe that's the problem. >>>> >>>> On 7/21/19, Dane Trethowan <[email protected]> wrote: >>>>> I’m doing some tests with the recorder at the moment. >>>>> Unfortunately I can’t get the recorder to work as a microphone with >>>>> the >>>>> iPhone or iPad mini. >>>>> The battery of the iPad Pro was dead flat so I haven’t ben able to try >>>>> that >>>>> though I suspect the results will be the same which is a pity. >>>>> >>>>> >>>>>> On 22 Jul 2019, at 6:49 am, Aidan <[email protected]> wrote: >>>>>> >>>>>> I agree. I won't use that allot, but its good to no how to turn it >>>>>> on/off. >>>>>> >>>>>> On 7/21/19, Dane Trethowan <[email protected]> wrote: >>>>>>> I haven't worked that out yet but I will. >>>>>>> I should draw your attention to a few things. >>>>>>> The Pre-Record buffer is only 2 seconds in length. >>>>>>> The buffer may not always work depending on what function of >>>>>>> recording >>>>>>> you >>>>>>> are using, it will not work with the "Countdown Timer" function I >>>>>>> think >>>>>>> its >>>>>>> call. >>>>>>> Given that this recorder is priced as low as it is these minor >>>>>>> oddities >>>>>>> seem >>>>>>> a fair tradeoff and don't affect the recorders prime aim which is to >>>>>>> make >>>>>>> some damn decent quality recordings. >>>>>>> >>>>>>> >>>>>>> -----Original Message----- >>>>>>> From: [email protected] <[email protected]> On Behalf Of Aidan >>>>>>> Sent: Sunday, 21 July 2019 11:56 PM >>>>>>> To: [email protected] >>>>>>> Subject: Re: [all-audio] Getting my Mac to recognize Zoom H1N as >>>>>>> external >>>>>>> drive >>>>>>> >>>>>>> So, could you figure out how to get pre record switched on or off, >>>>>>> and >>>>>>> when >>>>>>> play back, things like repeat and AB repeat and playback speed? >>>>>>> The manual dos not clearly state button combinations there. >>>>>>> >>>>>>> On 7/18/19, Dane Trethowan <[email protected]> wrote: >>>>>>>> As far as I know the only other option available might be for >>>>>>>> actually >>>>>>>> powering the device itself. >>>>>>>> There's no trouble in using the H1N with an IOS device for input >>>>>>>> and >>>>>>>> output. >>>>>>>> >>>>>>>> >>>>>>>> -----Original Message----- >>>>>>>> From: [email protected] <[email protected]> On Behalf Of Aidan >>>>>>>> Sent: Friday, 19 July 2019 1:29 AM >>>>>>>> To: [email protected] >>>>>>>> Subject: Re: [all-audio] Getting my Mac to recognize Zoom H1N as >>>>>>>> external drive >>>>>>>> >>>>>>>> Thanks dain this is what I always wanted to know. Do you perhaps no >>>>>>>> if >>>>>>>> there are other options on that USB screen, and how it will work >>>>>>>> when >>>>>>>> connecting it to ios for sound use. >>>>>>>> >>>>>>>> On 7/17/19, Dane Trethowan <[email protected]> wrote: >>>>>>>>> Okay here’s what you do. >>>>>>>>> You first need to turn the power on for the H1N recorder and wait >>>>>>>>> until the recorder is booted. >>>>>>>>> Then connect the USB cable from the recorder to the computer. >>>>>>>>> At this point the USB connection screen displays on the recorder. >>>>>>>>> Here’s where you need to use the 4 keys below the display >>>>>>>>> mentioned >>>>>>>>> previously so to get to Card Reader press `Limiter key - that’s >>>>>>>>> the >>>>>>>>> 3rd key from the left - and then press Auto level key - that’s the >>>>>>>>> right most key on the row, the forth. - You should now be able to >>>>>>>>> use >>>>>>>>> the recorder as a USB Card reader. >>>>>>>>> When finished make sure to “Safely Eject” the H1N from your >>>>>>>>> computer >>>>>>>>> system in which ever way your computer handles it. >>>>>>>>> Now going back to the USB screen for a moment. >>>>>>>>> If you press the Auto Level key twice then you will set the >>>>>>>>> recorder >>>>>>>>> to USB Sound Device mode. >>>>>>>>> I’ve tried all this on both a Mac and Windows machine. >>>>>>>>> Hope this helps. >>>>>>>>> >>>>>>>>> >>>>>>>>>> On 17 Jul 2019, at 10:36 pm, Mike Busboom <[email protected]> >>>>>>>>>> wrote: >>>>>>>>>> >>>>>>>>>> Hi everyone, >>>>>>>>>> >>>>>>>>>> can someone tell me how to get my Mac or PC to recognize my Zoom >>>>>>>>>> H1N >>>>>>>>>> as a hard drive? >>>>>>>>>> >>>>>>>>>> In terms of nomenclature, I call the horizontal buttons >>>>>>>>>> immediately >>>>>>>>>> below the display, from left to right, H1 through H4. I call the >>>>>>>>>> buttons below the Record button, B1 through B4, with B1 and B2 in >>>>>>>>>> the top row and B3 and >>>>>>>>>> B4 on the bottom row. >>>>>>>>>> >>>>>>>>>> What key combination do I need to press in order to make either a >>>>>>>>>> Mac or PC recognize the H1N as a hard drive? >>>>>>>>>> >>>>>>>>>> Thanks and all the best, >>>>>>>>>> >>>>>>>>>> Mike >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>> >>>>>> >>>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>> >>>> >>>> >>> >>> >>> >>> >>> >> >> >> > > > > > -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#2564): https://groups.io/g/all-audio/message/2564 Mute This Topic: https://groups.io/mt/32502774/21656 Group Owner: [email protected] Unsubscribe: https://groups.io/g/all-audio/leave/1074140/405281159/xyzzy [[email protected]] -=-=-=-=-=-=-=-=-=-=-=-
