Good idea, seems they make different sizes.

On 9/12/19, Dane Trethowan <> wrote:
> I got a Windscreen with my recorder though I’m going to see if a Gutman type
> is available which are far better.
>> On 12 Sep 2019, at 6:48 pm, Aidan <> wrote:
>> Really, great. The mikes is very sensitive, and I don't no wich wind
>> screen to use, I only have those of the h4n but when I used it with
>> GoldWave I had very good results. Stil need to do a few other tests
>> outside. I don't like the auto gain much, there olympus does better,
>> and the limiter have some noise so don't want to use it much, but the
>> rest is up to standard. I cannot get it to work on ios, so need to
>> maybe call zoom for that one.
>> On 9/12/19, Dane Trethowan <> wrote:
>>> So how are you finding the recorder thus far?
>>>> On 9 Sep 2019, at 8:25 pm, Aidan <> wrote:
>>>> Ok, I got one of these for a few days now, and now hope to answer
>>>> stuff that were still remained unclear.
>>>> When working with the four buttons, audio format, LowCut, limiter, and
>>>> auto gain, its best to give each to quick presses to ensure that you
>>>> actually toggle a setting, because the first press only give status as
>>>> to the current setting value.
>>>> The formats in sequence, are to my knoledge:
>>>> wave 44.1/16bit. Wave 48/16bit, wave 48/24bit, wave 96/24bit, mp3
>>>> 128kbps, mp3 192 kbps, mp3 256kbps, mp3 320kbps.
>>>> You can here the LowCut and limiter when they on/off when having
>>>> headphones connected.
>>>> To access the extra recording features, there is no menu button.
>>>> You must hold down the stop button, then while holding down, the for
>>>> buttons become the following from left to rite.
>>>> Auto record, pre record, self timer, and sound marker.
>>>> This makes it very easy to change settings.
>>>> So while holding down stop, you press the auto gain button for
>>>> example, twice, and it will turn on/off the sound marker.
>>>> When doing playback, this is what happens.
>>>> After pressing play, the back and forward buttons will skip files, and
>>>> to forward/rewind you must hold them down.
>>>> But dearing playback the four buttons shows the following.
>>>> from left to rite:
>>>> Mark, info, repeat, and moad.
>>>> And the marks you create when pressing the mark button only once per
>>>> time, will be usable in goldwave/soundforge.
>>>> I don't manage to see the marks in total recorder.
>>>> When pressing the LowCut wich become info dearing playbac, you enter a
>>>> file info screen wich you must navigate, and don't have much use to us
>>>> normally, so I didn't play there really.
>>>> Repeat also is working by pressing the button twice quickly to change
>>>> between, repeat one, repeat all, and off.
>>>> When pressing the auto gain button wich became moad dearing playback,
>>>> a new screen appears.
>>>> Then you find that the buttons from left to rite become:
>>>> Speed, Sound/EQ a - b repeat, and return to previous screen.
>>>> As the file play you will here as you change speed with the audio
>>>> format button, or the EQ with the LowCut button.
>>>> Same with A B repeat. And also while in that screen, the forward and
>>>> back buttons will move more rapitly fru the file when pressed and let
>>>> go as suppose to holding them down.
>>>> If you stop playback you can exit that screen or just press the auto
>>>> gain button wich will take you to the first playback screen you get
>>>> when pressing play, wich contain mark, info, repeat, and mode.
>>>> When connecting to pc this is what you get,
>>>> the USB screen each time a cable is connected, will lands on audio
>>>> interface mode or whatever they call it.
>>>> You then need to press the limiter once to move to card reader and
>>>> then press the auto gain button wich will act as enter, and mass
>>>> storage will connect.
>>>> When disconnecting from pc, and this was never discussed, I guess
>>>> there could be more than one way to do it, I don't no, but this is
>>>> what I found.
>>>> I press and hold down the stop button, then the format button becomes
>>>> direct monitor on/off, and the auto gain button becomes exit.
>>>> So while holding stop I press auto gain once, then the exit screen
>>>> comes up, then I press LowCut wich is up arrow, and auto gain for
>>>> enter, then it will return to the main screen and you will here pc
>>>> disconnect.
>>>> If you don't interact with it after removing the cable it won't return
>>>> to your file list or recording screen.
>>>> As for sound card mode, this is what you get.
>>>> When inserting the cable, it will move to audio interface mode each
>>>> time.
>>>> Now you press auto gain to enter, then you can choose between pc/mac or
>>>> ios.
>>>> It will land on pc/mac each time you press enter on the audio interface
>>>> option.
>>>> So you can just press enter again, then it will ask for wich sorce you
>>>> want to use for power, Buss power or batteries?
>>>> It lands on buss power each time that promt is accessed, so you can
>>>> just press enter again. Only then your inputs and outputs will appear
>>>> in windows/mac.
>>>> I stil have to figure out ios mode.
>>>> When deleting a file you press delete, then LowCut for up arrow, then
>>>> enter/auto gain to except/confirm.
>>>> I stil have to figure out how to delete marks on the recorder.
>>>> Currently I delete them from GoldWave.
>>>> Lastly, to access the setting screen, (sited help is well needed here)
>>>> you hold down delete while powering on.
>>>> to update the firmware after copyed the bin file to the SD card, you
>>>> hold down the play/pause button while powering on.
>>>> And to overdub, you hold play/pause and then press record.
>>>> Just keep format set to wave.
>>>> Hope this can help as only some things were breethly mentioned and the
>>>> manual not well rittin.
>>>> Aidan

-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group.

View/Reply Online (#2826):
Mute This Topic:
Group Owner:

Reply via email to