Thanks, I will definitely look into that. On Wed, 18 Sep 2019 at 10:34, Dane Trethowan <grtd...@internode.on.net> wrote:
> Its not hard to find the size you require. > I shop for the Gutman Windscreens on eBay and I just type in "Gutman Zoom > H1N" for example which turns up the appropriate windscreen size. > > > -----Original Message----- > From: all-audio@groups.io <all-audio@groups.io> On Behalf Of Aidan > Sent: Thursday, 12 September 2019 9:58 PM > To: all-audio@groups.io > Subject: Re: [all-audio] h1n furder findings not discussed yet by anyone > > Good idea, seems they make different sizes. > > On 9/12/19, Dane Trethowan <grtd...@internode.on.net> wrote: > > I got a Windscreen with my recorder though I’m going to see if a > > Gutman type is available which are far better. > > > > > >> On 12 Sep 2019, at 6:48 pm, Aidan <aidan.smartt...@gmail.com> wrote: > >> > >> Really, great. The mikes is very sensitive, and I don't no wich wind > >> screen to use, I only have those of the h4n but when I used it with > >> GoldWave I had very good results. Stil need to do a few other tests > >> outside. I don't like the auto gain much, there olympus does better, > >> and the limiter have some noise so don't want to use it much, but the > >> rest is up to standard. I cannot get it to work on ios, so need to > >> maybe call zoom for that one. > >> > >> On 9/12/19, Dane Trethowan <grtd...@internode.on.net> wrote: > >>> So how are you finding the recorder thus far? > >>> > >>> > >>>> On 9 Sep 2019, at 8:25 pm, Aidan <aidan.smartt...@gmail.com> wrote: > >>>> > >>>> Ok, I got one of these for a few days now, and now hope to answer > >>>> stuff that were still remained unclear. > >>>> When working with the four buttons, audio format, LowCut, limiter, > >>>> and auto gain, its best to give each to quick presses to ensure > >>>> that you actually toggle a setting, because the first press only > >>>> give status as to the current setting value. > >>>> The formats in sequence, are to my knoledge: > >>>> wave 44.1/16bit. Wave 48/16bit, wave 48/24bit, wave 96/24bit, mp3 > >>>> 128kbps, mp3 192 kbps, mp3 256kbps, mp3 320kbps. > >>>> You can here the LowCut and limiter when they on/off when having > >>>> headphones connected. > >>>> To access the extra recording features, there is no menu button. > >>>> You must hold down the stop button, then while holding down, the > >>>> for buttons become the following from left to rite. > >>>> Auto record, pre record, self timer, and sound marker. > >>>> > >>>> This makes it very easy to change settings. > >>>> So while holding down stop, you press the auto gain button for > >>>> example, twice, and it will turn on/off the sound marker. > >>>> When doing playback, this is what happens. > >>>> After pressing play, the back and forward buttons will skip files, > >>>> and to forward/rewind you must hold them down. > >>>> But dearing playback the four buttons shows the following. > >>>> from left to rite: > >>>> Mark, info, repeat, and moad. > >>>> And the marks you create when pressing the mark button only once > >>>> per time, will be usable in goldwave/soundforge. > >>>> I don't manage to see the marks in total recorder. > >>>> When pressing the LowCut wich become info dearing playbac, you > >>>> enter a file info screen wich you must navigate, and don't have > >>>> much use to us normally, so I didn't play there really. > >>>> Repeat also is working by pressing the button twice quickly to > >>>> change between, repeat one, repeat all, and off. > >>>> When pressing the auto gain button wich became moad dearing > >>>> playback, a new screen appears. > >>>> Then you find that the buttons from left to rite become: > >>>> Speed, Sound/EQ a - b repeat, and return to previous screen. > >>>> As the file play you will here as you change speed with the audio > >>>> format button, or the EQ with the LowCut button. > >>>> Same with A B repeat. And also while in that screen, the forward > >>>> and back buttons will move more rapitly fru the file when pressed > >>>> and let go as suppose to holding them down. > >>>> If you stop playback you can exit that screen or just press the > >>>> auto gain button wich will take you to the first playback screen > >>>> you get when pressing play, wich contain mark, info, repeat, and mode. > >>>> When connecting to pc this is what you get, the USB screen each > >>>> time a cable is connected, will lands on audio interface mode or > >>>> whatever they call it. > >>>> You then need to press the limiter once to move to card reader and > >>>> then press the auto gain button wich will act as enter, and mass > >>>> storage will connect. > >>>> When disconnecting from pc, and this was never discussed, I guess > >>>> there could be more than one way to do it, I don't no, but this is > >>>> what I found. > >>>> I press and hold down the stop button, then the format button > >>>> becomes direct monitor on/off, and the auto gain button becomes exit. > >>>> So while holding stop I press auto gain once, then the exit screen > >>>> comes up, then I press LowCut wich is up arrow, and auto gain for > >>>> enter, then it will return to the main screen and you will here pc > >>>> disconnect. > >>>> If you don't interact with it after removing the cable it won't > >>>> return to your file list or recording screen. > >>>> > >>>> As for sound card mode, this is what you get. > >>>> When inserting the cable, it will move to audio interface mode each > >>>> time. > >>>> Now you press auto gain to enter, then you can choose between > >>>> pc/mac or ios. > >>>> It will land on pc/mac each time you press enter on the audio > >>>> interface option. > >>>> So you can just press enter again, then it will ask for wich sorce > >>>> you want to use for power, Buss power or batteries? > >>>> It lands on buss power each time that promt is accessed, so you can > >>>> just press enter again. Only then your inputs and outputs will > >>>> appear in windows/mac. > >>>> I stil have to figure out ios mode. > >>>> When deleting a file you press delete, then LowCut for up arrow, > >>>> then enter/auto gain to except/confirm. > >>>> I stil have to figure out how to delete marks on the recorder. > >>>> Currently I delete them from GoldWave. > >>>> Lastly, to access the setting screen, (sited help is well needed > >>>> here) you hold down delete while powering on. > >>>> to update the firmware after copyed the bin file to the SD card, > >>>> you hold down the play/pause button while powering on. > >>>> > >>>> And to overdub, you hold play/pause and then press record. > >>>> Just keep format set to wave. > >>>> > >>>> Hope this can help as only some things were breethly mentioned and > >>>> the manual not well rittin. > >>>> > >>>> Aidan > >>>> > >>>> > >>>> > >>> > >>> > >>> > >>> > >>> > >> > >> > >> > > > > > > > > > > > > > > > > > > -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#2841): https://groups.io/g/all-audio/message/2841 Mute This Topic: https://groups.io/mt/34078119/21656 Group Owner: all-audio+ow...@groups.io Unsubscribe: https://groups.io/g/all-audio/leave/1074140/405281159/xyzzy [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-