To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=110368
------- Additional comments from [email protected] Sat Mar 27 02:46:27 +0000 2010 ------- Did not try the original OpenOffice 2 file conversion into 3.1 or 3.3 but was able to Reproduced the problem on loading "badconnector.ocp", into OOo versions: Open Office Impress (3.1.1 - 9420) and (3.3.0 DEV - 9488). Configuration: WinXP (SP3) 2002 multimedia, HP Pavillon, dv9005us. Seems like the converted file has some disabled connector properties for Line Skew / Line 1. 1). Using Edit -> Duplicate of bad connector slide created a duplicate slide with a fixed connector. 2). On moving a box or the line on bad connector slide the connector was fixed. 3). By re-selecting the type field in connector property dialog the connector was fixed. The change in the connector property in all these case the header Line Skew for Line 1 and numeric value were enabled and numeric field was set to 0.0. 4). Another possibilities issue could be the numeric value has a right context menu item that can be set the value to a non-numeric "special character" values. Tested setting non-numeric values but value got reset to last valid numeric field. 5). Was able to reproduce the bad connector sensitive to moving line and boxes on bad slide but once connector was fixed did not see this behavior anymore. 6). The bad connector could also be replicated by inputting a large value, 7, in the fixed connector Line 1 Skew numeric field. --------------------------------------------------------------------- Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected] --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected]
