what is time code then? Sometimes it says the clock source is word clock and in () it puts no signal, and sometimes it doesn't.
I have card0 as Master and card1 as 'Word Clock' If I arecord card0 at 96000, card1 still shows 48000 for its sample rate. I can then not bring the cards back to 48000 or 44100 unless I unload and reload the modules--I get device or resource busy if I try to switch back. _J In the new year, Paul Davis wrote: > >First, have there been any clock modifications to the rme9652, or > >potential problems cropping up over the last few months that would make > >word clock sync not possible? > > no. word clock sync works fine here. > > >What kind of cabling and terminators should be used? Can one connect the > >BNC connectors directly to the card without going through a t > >connector? (as in will the hammerfall provide termination) I thought I saw > >something from rme on the subject but it appears to have disappeared. > > i have never seen any docs on whether the hammerfall self-terminates. > it would be good to know. > > you should be preferably be using cables made for word clock such as > those by apogee, but since these cost 5 times more than a standard > 75ohm coaxial video cable, its understandable if you didn't. in the > studio, we have both kinds of cables, and actually, its the apogee one > that was bad. > > >Can we have a feature that tells us in the logs (if asked to) that we have > >lost clock sync on some port, or that time code is not valid if using word > >clock etc? > > 1) time code has *nothing* do to with word clock. they are totally > independent of each in every way. > > 2) the hammerfall has read-only sync-status controls. ardour/gtk uses > them to display sync status in its GUI. the driver doesn't > want the responsibility of polling their condition - thats > the job of an application. take a look at the code in > audioengine/hammerfall.cc to see how this is done. > > --p > > _______________________________________________ > Alsa-devel mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/alsa-devel > _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
