Peter Heatwole [[EMAIL PROTECTED]] wrote: > On 2002.10.29 08:36 Bob McElrath wrote: > >I don't see a debug setting on the modules snd-cs46xx or snd -- is > >this a compile time setting? > > Yes, you set this when you configure the package. Use the configure > option "--with-debug=detect" for the most verbose debugging output. > > > >What is the easy way to test playing to the rear pcm channel? > > The easy way: aplay -Dhw:0,1 test.wav
Seems to work well. The relevant mixer settings are PCM1 and Surround1
(both of which must be turned up and unmuted. However it doesn't seem
to deal well with odd rates:
(0)<mcelrath@draal:/home/mcelrath> aplay -Dhw:0,1 /usr/share/sounds/zipper.wav
Playing WAVE '/usr/share/sounds/zipper.wav' : Unsigned 8 bit, Rate 11025 Hz, Mono
aplay: pcm_write:968: write error: Input/output error
> Just don't forget to unmute and raise the volume for the rear-output.
> Also, if you wish to output directly to SPDIF, use: "aplay -Dhw:0,2".
Unfortunately I don't have any hardware which can deal with SPDIF
(except my Marvel TV card which only has an output).
> Thanks for testing. ;-)
No prob.
> HTH,
Have The Ham?
Cheers,
-- Bob
Bob McElrath ([EMAIL PROTECTED])
Univ. of Wisconsin at Madison, Department of Physics
"The surest way to corrupt a youth is to instruct him to hold in higher
esteem those who think alike than those who think differently."
-- Nietzsche
msg05076/pgp00000.pgp
Description: PGP signature
