On Mon, 2002-12-16 at 07:23, Paul Davis wrote: > >> that reminds me. the last version of the alsasound script that i saw > >> did something very dangerous. it seemed to try to install *every* > >> snd-card module it could find. if you have a system with an ISA bus, > >> this can prove fatal to the system - many ISA device probes will kill > >> the machine if the device is not present. > > > >well, you can find that the alsasound script tries to load the modules > >aliased as "snd-card-[0-9]", not the all snd-card-* modules. > >remember that there is no module named as such. that means, if such a > >module is found, it was certainly configured by some means. > > ah. sorry, i missed the -c on modprobe. i take it all back :( > > --p
I wonder if this could have anything to do with a different problem I'm seeing. I have a HDSP 9652 and a MidiMan 2X2 interface. The HDSP is installed by alsaconf. The 2X2 is installed usign Fernando's instructions from the Planet. When I do a cold boot, the HDSP is always recognized first, and then the MidiMan comes up as card 2, at least by reading the numbers of the devices in /dev/snd. However, if I reboot, many times the system makes the 2X2 card 1 and the HDSP card 2, and that breaks a lot of this software. What would cause this to happen and how could I stop it? I have found that everything seems to work fine if I remember to unplug the 2X2 when the reboot begins, but sometimes I don't remember and have to go through one more boot cycle. Cheers, Mark ------------------------------------------------------- This sf.net email is sponsored by: With Great Power, Comes Great Responsibility Learn to use your power at OSDN's High Performance Computing Channel http://hpc.devchannel.org/ _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
