Takashi Iwai wrote: > Mark Knecht wrote: > > I was wondering what would happen in this process if someone had two r > > three identical USB devices, like the MidiMan 2X2? OR also two identical > > cards like the RME HDSP 9652? > > when a module is loaded and two or more identical (or supported) > devices are connected, the module will initialize the all such devices > at once. > > for multiple devices, you can specify the options separated by commas, > > > It is important that the system recognize the same hardware as the same > > sound device every time the machine booted, and whether the machine is > > warm or cold booted. > > in the case of usb, it's not 100% sure, because it's anyway > hotpluggable. but usually the order of probing is identical, so it's > ok.
It is possible to force USB devices to a specific index with the vid/pid parameters for the vendor/product id, even when hotplugging. However, this won't work when you hotplug two identical devices (with the same product id). Clemens ------------------------------------------------------- This SF.NET email is sponsored by: The Best Geek Holiday Gifts! Time is running out! Thinkgeek.com has the coolest gifts for your favorite geek. Let your fingers do the typing. Visit Now. T H I N K G E E K . C O M http://www.thinkgeek.com/sf/ _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
