> post-install snd-hdsp /usr/bin/hdsploader > [EMAIL PROTECTED] etc]# > > > [EMAIL PROTECTED] etc]# hdsploader > hdsploader - firmware loader for RME Hammerfall DSP cards > Looking for HDSP + Multiface or Digiface cards : > Card 0 : RME HDSP 9652 at 0xe8800000, irq 10 > [EMAIL PROTECTED] etc]# > >
Note that you do not need to run hdsploader with the HDSP9652 card. Note too that one wouldn't need superuser privileges for the tool to work, anyway. > > [EMAIL PROTECTED] root]# lsmod > Module Size Used by Not tainted > ide-cd 35548 0 (autoclean) > cdrom 33344 0 (autoclean) [ide-cd] > snd-mixer-oss 16536 2 (autoclean) > snd-seq-midi 5280 0 (unused) > snd-seq-midi-event 5928 0 [snd-seq-midi] > snd-seq 49648 0 [snd-seq-midi snd-seq-midi-event] > snd-hdsp 39212 2 > snd-pcm 85888 0 [snd-hdsp] > snd-page-alloc 8452 0 [snd-pcm] > snd-timer 20776 0 [snd-seq snd-pcm] > snd-rawmidi 19712 0 [snd-seq-midi snd-hdsp] > snd-seq-device 6380 0 [snd-seq-midi snd-seq snd-rawmidi] > snd-hwdep 7008 0 [snd-hdsp] > snd 44836 0 [snd-mixer-oss snd-seq-midi > snd-seq-midi-event snd-seq snd-hdsp snd-pcm snd-timer snd-rawmidi > snd-seq-device snd-hwdep] > soundcore 6724 5 [snd] > snd-hammerfall-mem 2976 0 [snd-hdsp] > autofs 13588 0 (autoclean) (unused) > bcm4400 31136 1 > ipt_REJECT 3928 6 (autoclean) > iptable_filter 2412 1 (autoclean) > ip_tables 14904 2 [ipt_REJECT iptable_filter] > ohci1394 29224 0 (unused) > ieee1394 60044 0 [ohci1394] > mousedev 5588 0 (unused) > keybdev 2912 0 (unused) > hid 22148 0 (unused) > input 5824 0 [mousedev keybdev hid] > usb-uhci 27116 0 (unused) > ehci-hcd 20488 0 (unused) > usbcore 79840 1 [hid usb-uhci ehci-hcd] > ext3 71808 1 > jbd 53908 1 [ext3] > [EMAIL PROTECTED] root]# > > > [EMAIL PROTECTED] root]# cat /proc/interrupts > CPU0 > 0: 1977701 XT-PIC timer > 1: 8743 XT-PIC keyboard > 2: 0 XT-PIC cascade > 3: 2178 XT-PIC eth0 > 8: 1 XT-PIC rtc > 9: 0 XT-PIC ehci-hcd, usb-uhci, usb-uhci, usb-uhci > 10: 57026 XT-PIC hdsp > 11: 2 XT-PIC ohci1394 > 12: 48832 XT-PIC PS/2 Mouse > 14: 13159 XT-PIC ide0 > 15: 9355 XT-PIC ide1 > NMI: 0 > LOC: 1977713 > ERR: 2364 > MIS: 0 > [EMAIL PROTECTED] root]# > > > [EMAIL PROTECTED] card0]# more /proc/asound/card0/hdsp > RME HDSP 9652 (Card #1) > Buffers: capture dde00000 playback ddc00000 > IRQ: 10 Registers bus: 0xe8800000 VM: 0xe0967000 > Control register: 0x1008098 > Status register: 0x6086a48 > Status2 register: 0xffff8061 > FIFO status: 0 > MIDI1 Output status: 0xffffff00 > MIDI1 Input status: 0xffffff80 > MIDI2 Output status: 0xffffff00 > MIDI2 Input status: 0xffffff5f > > Buffer Size (Latency): 1024 samples (2 periods of 4096 bytes) > Hardware pointer (frames): 1024 > Passthru: no > Line out: on > Firmware version: 1 > > Sample Clock Source: Internal 44.1 kHz > Preferred Sync Reference: ADAT1 > AutoSync Reference: ADAT1 > AutoSync Frequency: 48000 > System Clock Mode: Master > System Clock Frequency: 44100 > > IEC958 input: Internal > IEC958 output: Coaxial only > IEC958 quality: Consumer > IEC958 emphasis: off > IEC958 NonAudio: off > IEC958 sample rate: Error flag set > > ADAT1: Lock > ADAT2: No Lock > ADAT3: No Lock > SPDIF: No Lock > Word Clock: No Lock > ADAT Sync: No Lock > > [EMAIL PROTECTED] card0]# > This looks good to me. The way the matrix mixer is handled for the HDSP9652 series differs from the cardbus/pci Digiface/Multiface. It looks to me like the mixer offset from the iobase is wrong. This could explain both the absence of sound and the locks. I need to put a hand on a HDSP9652 card to investigate this. Thomas ------------------------------------------------------- This SF.net email is sponsored by: Etnus, makers of TotalView, The debugger for complex code. Debugging C/C++ programs can leave you feeling lost and disoriented. TotalView can help you find your way. Available on major UNIX and Linux platforms. Try it free. www.etnus.com _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
