At Sat, 27 Dec 2003 01:31:52 +0100, Dominik 'Aeneas' Schnitzer wrote: > > [1 <text/plain (7bit)>] > Hi, > > I finally got my emu10k1 soundcard working with full 5.1 surround :-) > > It took me 2 days, getting alsa to know and sound working properly. I > finally found out that /usr/share/alsa/cards/EMU10K1.conf was b0rked and > modified it so everything now works properly. Things which prevented it > from working properly were: > > - Rear/Center&&LFE Volume Controls in the config file were set to 0 and > locked!..
"Wave XXX Volume" controls should be zero for multi-channel outputs indeed, because these are volumes of signals duplicated from the front channel to surround/center/lfe channels. locking could be optional, though. > - surround51 was statically bound to the non-digital output and locked > (to the analogue output), so there was no way to get surround sound on > my digital-out. hmm, i'm not sure about this. surround51 was designed for outputs from three analog jacks. what do you get from digital out with surround51? does the card send non-encoded raw 6-channel PCM over spdif? > - other volume controls were locked too, I had a look at Audigy.conf > and reduced the locked controls to the minimum required. on Audigy, the signal routing and control elements are fairly different from SB Live. so, you cannot copy it simply... Takashi ------------------------------------------------------- This SF.net email is sponsored by: IBM Linux Tutorials. Become an expert in LINUX or just sharpen your skills. Sign up for IBM's Free Linux Tutorials. Learn everything from the bash shell to sys admin. Click now! http://ads.osdn.com/?ad_id=1278&alloc_id=3371&op=click _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
