At Wed, 7 Jan 2004 17:20:27 +0100, Eckhard Jokisch wrote: > > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > > > > - "IEC958 Optical Playback Volume" up, "IEC958 Coaxial Playback > > Volume" down > > -> digital-input (from live-drive) to analog out ? > If you mean the output on the rear side of the computer (the green jack ) > that's what I did. > > > > - in the above, "optical" down and "coax" up. > > > > > > it will be logical if you don't hear sounds from digital-in via > > "optical playback" volume but via "coax playback"... > The strange thing is that I can use the faders for "optical" for both sources. > No matter if I use optical-in or coax-in both are regulated by the same fader.
sorry, i misspelled. "optical" should control both playback volumes, instead of "coax". it means that sb live drive doesn't have independent inputs from optical and coax. both are always mixed up. maybe it's better to rename "IEC958 optical" to e.g. "IEC958 LiveDrive". also i don't know then what "coax" actually is connected... Takashi ------------------------------------------------------- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
