On Wed, 7 Jan 2004, Takashi Iwai wrote:

> At Wed, 7 Jan 2004 17:20:27 +0100,
> Eckhard Jokisch wrote:
> > 
> > -----BEGIN PGP SIGNED MESSAGE-----
> > Hash: SHA1
> > 
> > >
> > > - "IEC958 Optical Playback Volume" up, "IEC958 Coaxial Playback
> > >   Volume" down
> > >   -> digital-input (from live-drive) to analog out ?
> > If you mean the output on the rear side of the computer (the green jack ) 
> > that's what I did.
> > >
> > > - in the above, "optical" down and "coax" up.
> > >
> > >
> > > it will be logical if you don't hear sounds from digital-in via
> > > "optical playback" volume but via "coax playback"...
> > The strange thing is that I can use the faders for "optical" for both sources.
> > No matter if I use optical-in or coax-in both are regulated by the same fader.
> 
> sorry, i misspelled.  "optical" should control both playback volumes,
> instead of "coax".
> 
> it means that sb live drive doesn't have independent inputs from optical
> and coax.  both are always mixed up. maybe it's better to rename "IEC958
> optical" to e.g. "IEC958 LiveDrive".

Or IEC958 Digital

- D


-------------------------------------------------------
This SF.net email is sponsored by: Perforce Software.
Perforce is the Fast Software Configuration Management System offering
advanced branching capabilities and atomic changes on 50+ platforms.
Free Eval! http://www.perforce.com/perforce/loadprog.html
_______________________________________________
Alsa-devel mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-devel

Reply via email to