Thomas Charbonnel wrote on Wed, 28-Jan-2004: > In the process of debuging the problems some hdsp users are > experiencing, I reviewed almost every single line of code in the hdsp > driver, and there are things in there that were inherited from the old > rme9652 driver and that don't seem relevant anymore for the hdsp > (particularly now that hdspmixer is there). > * Does anyone use the passthru control ? If not I would gladly remove it > as it interferes with hdspmixer. Anyway everything it did can be done > with hdspmixer or the Mixer control using a shell script. > * The current behaviour is that the driver cancels any 1:1 input to > output routing when playback or capture is enabled. Not only this > interferes with hdspmixer, but I find it rather confusing. Any objection > to a change here also ?
I never use it.... ++vote to get rid of it. And by the way, my hardware/software works completely fine (no problems whatsoever): IBM ThinkPad A31 1.8 P4-M Cardbus HDSP/Multiface rev 0xb kernel 2.4.21 , alsa 0.9.8 And while I have your attention, i've tried to get iec958 spdif passthrough (non-audio AC3) working on the HDSP without success. I created a HDSP.conf based on the RME9652.conf and got the device properly opened using ac3dec -C , but no stream is passed (using ADAT1 optical output, properly set as SPDIF in hdspconf). Setting the non-audio flag doesn't appear to have any effect. It works fine as an output for regular PCM spdif operation. Any ideas you or the other alsa gurus have would be most welcome. jlc ------------------------------------------------------- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
