On Wed, 2004-01-28 at 15:29, Thomas Charbonnel wrote: > Hi, > > In the process of debuging the problems some hdsp users are > experiencing, I reviewed almost every single line of code in the hdsp > driver, and there are things in there that were inherited from the old > rme9652 driver and that don't seem relevant anymore for the hdsp > (particularly now that hdspmixer is there). > * Does anyone use the passthru control ? If not I would gladly remove it > as it interferes with hdspmixer. Anyway everything it did can be done > with hdspmixer or the Mixer control using a shell script. > * The current behaviour is that the driver cancels any 1:1 input to > output routing when playback or capture is enabled. Not only this > interferes with hdspmixer, but I find it rather confusing. Any objection > to a change here also ?
I have never used it. ANything that simplifies the driver is good. > I also realized communicating with RME that the firmware files we use in > linux are not the same as those used in current versions of the windows > and mac drivers. As a consequence people using dual boot systems should > always power cycle their iobox when switching operating systems to > prevent any problem (this is of particular importance to rev 0xa users). > This minor issue will be resolved shortly as I'm working on switching to > those files for the linux driver. The new firmware files seem to be > revision independant (but they do require a driver modification) and add > support for disconnect mode (standalone operation of the iobox - I have > it working here, it's awesome !) How does that work? You just set up the routing and it stays there while the box has power? justin ------------------------------------------------------- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
