Stanislav Vlasic wrote:
> pcm.!default {
> type hw
> card 0
> device 1
> format S16_LE
> }
>
> For 3.5mm jack audio enabled, difference is only in pcm.!default where
> device is set to 0.
>
> Is there a way to write asound.conf where both audio outputs will be
> enabled at same time?
With any luck, your hardware has a mixer control to route the PCM data
to both outputs.
Otherwise, try this:
pcm.!default {
type asym
playback.pcm {
type plug
slave.pcm {
type multi
slaves {
analog { pcm "hw:0,0" channels 2 }
hdmi { pcm "hw:0,1" channels 2 }
}
bindings [
{ slave analog channel 0 }
{ slave analog channel 1 }
{ slave hdmi channel 0 }
{ slave hdmi channel 1 }
]
}
}
ttable [
[ 1 0 1 0 ]
[ 0 1 0 1 ]
]
}
capture.pcm "hw:0,0"
}
Regards,
Clemens
------------------------------------------------------------------------------
Go from Idea to Many App Stores Faster with Intel(R) XDK
Give your users amazing mobile app experiences with Intel(R) XDK.
Use one codebase in this all-in-one HTML5 development environment.
Design, debug & build mobile apps & 2D/3D high-impact games for multiple OSs.
http://pubads.g.doubleclick.net/gampad/clk?id=254741911&iu=/4140
_______________________________________________
Alsa-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-user
