Hi,
thanx for your reply. It's not working (after removing one extra brace
from your example) , 99% because of kernel driver...
On 12/08/2015 09:19 AM, Clemens Ladisch wrote:
> Stanislav Vlasic wrote:
>> pcm.!default {
>> type hw
>> card 0
>> device 1
>> format S16_LE
>> }
>>
>> For 3.5mm jack audio enabled, difference is only in pcm.!default where
>> device is set to 0.
>>
>> Is there a way to write asound.conf where both audio outputs will be
>> enabled at same time?
>
> With any luck, your hardware has a mixer control to route the PCM data
> to both outputs.
>
> Otherwise, try this:
>
> pcm.!default {
> type asym
> playback.pcm {
> type plug
> slave.pcm {
> type multi
> slaves {
> analog { pcm "hw:0,0" channels 2 }
> hdmi { pcm "hw:0,1" channels 2 }
> }
> bindings [
> { slave analog channel 0 }
> { slave analog channel 1 }
> { slave hdmi channel 0 }
> { slave hdmi channel 1 }
> ]
> }
> }
> ttable [
> [ 1 0 1 0 ]
> [ 0 1 0 1 ]
> ]
> }
> capture.pcm "hw:0,0"
> }
>
>
> Regards,
> Clemens
>
> ------------------------------------------------------------------------------
> Go from Idea to Many App Stores Faster with Intel(R) XDK
> Give your users amazing mobile app experiences with Intel(R) XDK.
> Use one codebase in this all-in-one HTML5 development environment.
> Design, debug & build mobile apps & 2D/3D high-impact games for multiple OSs.
> http://pubads.g.doubleclick.net/gampad/clk?id=254741911&iu=/4140
>
------------------------------------------------------------------------------
Go from Idea to Many App Stores Faster with Intel(R) XDK
Give your users amazing mobile app experiences with Intel(R) XDK.
Use one codebase in this all-in-one HTML5 development environment.
Design, debug & build mobile apps & 2D/3D high-impact games for multiple OSs.
http://pubads.g.doubleclick.net/gampad/clk?id=254741911&iu=/4140
_______________________________________________
Alsa-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-user
