the reason why alsaplayer doesn't work with the hammerfall cards is because it can't run full duplex cards with the alsa libs. if i'm wrong, please point it out because i'd love to run alsaplayer on my delta 44. HOWEVER, if you have an RME card, to get it to work you have to build the JACK plugin. apparantly the person who built jack has a hammerfall card as hardware to test jack on. so alsaplayer WILL work with RME cards only if you have the jack library built. look it up in the alsaplayer list archives to verify what i've said.
i think the call turn out to be something like: alsaplayer -o JACK or something like that On 4 Apr 2002, Bearcat M. Sandor wrote: > I have a Pioneer 106s DVD drive. I have connected the 2 pin digital out > to my RME 96/36 HammerFall sound card. I can play mp3s, oggs, wave files > and the sound from mpeg movies through this card to my preamp just fine. > However playing Cds and DVDs result in no sound. > > > using gtcd results in no error messages but i get no sound. > > Alsa player reports: > failed to configure output device...trying OSS > Closing already opened plugin?! > > Xine reports: > audio_alsa_out: Audio Device name = > iec958:AES0=0x6,AES1=0x82,AES2=0x0,AES3=0x2 > audio_alsa_out: Number of channels = 2 > ALSA lib pcm.c:1607:(snd_pcm_open_conf) Invalid type for PCM > iec958:AES0=0x6,AES1=0x82,AES2=0x0,AES3=0x2 definition (id: iec958, > value: cards.pcm.iec958) > audio_alsa_out: snd_pcm_open() failed: Invalid argument > audio_alsa_out: >>> check if another program don't already use PCM <<< > audio_out: open failed! > > again playing mpeg movies in xine works fine... > > my alsa modules.conf are as follows: > > options snd snd_device_gid=29 snd_device_mode=0660 snd_cards_limit=1 > > alias char-major-116 snd > alias char-major-14 soundcore > > alias snd-card-0 snd-rme9652 > alias sound-slot-0 snd-card-0 > > alias sound-service-0-0 snd-mixer-oss > alias sound-service-0-1 snd-seq-oss > alias sound-service-0-3 snd-pcm-oss > alias sound-service-0-8 snd-seq-oss > alias sound-service-0-12 snd-pcm-oss > > # post-install snd-card-0 /usr/sbin/alsactl restore > > > any ideas would be greatly appreciated! > > Bearcat M. Sandor > > > > > _______________________________________________ > Alsa-user mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/alsa-user > _______________________________________________ Alsa-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-user
