All,
,
Thank you, but I don;t think it is an alsa player issue, as I can not
get the dvd player digital output to work with anything.
I belive it may be something in my settings, which I have output below.
What in the settings below, or else ware, turns on the 2-pin digital
input on my hammerfall card?
Let me know if you need any additional informations. Thank you.
Bearcat M. Sandor
/etc/asound.state
state.card0 {
control.1 {
comment.access 'read write'
comment.type IEC958
iface PCM
name 'IEC958 Playback Default'
value
'0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
}
control.2 {
comment.access 'read write inactive'
comment.type IEC958
iface PCM
name 'IEC958 Playback PCM Stream'
value
'0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
}
control.3 {
comment.access read
comment.type IEC958
iface MIXER
name 'IEC958 Playback Con Mask'
value
'3b00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
}
control.4 {
comment.access read
comment.type IEC958
iface MIXER
name 'IEC958 Playback Pro Mask'
value
'1f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
}
control.5 {
comment.access 'read write'
comment.type ENUMERATED
comment.item.0 ADAT1
comment.item.1 Coaxial
comment.item.2 Internal
iface PCM
name 'IEC958 Input Connector'
value Coaxial
}
control.6 {
comment.access 'read write'
comment.type BOOLEAN
iface PCM
name 'IEC958 Output also on ADAT1'
value false
}
control.7 {
comment.access 'read write'
comment.type ENUMERATED
comment.item.0 AutoSync
comment.item.1 Master
comment.item.2 'Word Clock'
iface PCM
name 'Sync Mode'
value AutoSync
}
control.8 {
comment.access 'read write'
comment.type ENUMERATED
comment.item.0 'IEC958 In'
comment.item.1 'ADAT1 In'
comment.item.2 'ADAT2 In'
iface PCM
name 'Preferred Sync Source'
value 'ADAT1 In'
}
control.9 {
comment.access 'read write'
comment.type BOOLEAN
iface PCM
name 'Channels Thru'
value.0 false
value.1 false
value.2 false
value.3 false
value.4 false
value.5 false
value.6 false
value.7 false
value.8 false
value.9 false
value.10 false
value.11 false
value.12 false
value.13 false
value.14 false
value.15 false
value.16 false
value.17 false
}
control.10 {
comment.access read
comment.type INTEGER
comment.range '0 - 96000'
iface PCM
name 'IEC958 Sample Rate'
value -1
}
control.11 {
comment.access read
comment.type ENUMERATED
comment.item.0 'No Lock'
comment.item.1 Lock
comment.item.2 'No Lock Sync'
comment.item.3 'Lock Sync'
iface PCM
name 'ADAT1 Sync Check'
value 'No Lock'
}
control.12 {
comment.access read
comment.type ENUMERATED
comment.item.0 'No Lock'
comment.item.1 Lock
comment.item.2 'No Lock Sync'
comment.item.3 'Lock Sync'
iface PCM
name 'ADAT2 Sync Check'
value 'No Lock'
}
control.13 {
comment.access read
comment.type ENUMERATED
comment.item.0 'No Lock'
comment.item.1 Lock
comment.item.2 'No Lock Sync'
comment.item.3 'Lock Sync'
iface PCM
name 'ADAT3 Sync Check'
value 'No Lock'
}
control.14 {
comment.access read
comment.type BOOLEAN
iface PCM
name 'Timecode Valid'
value false
}
control.15 {
comment.access 'read write'
comment.type BOOLEAN
iface PCM
name Passthru
value false
}
control.16 {
comment.access 'read write'
comment.type ENUMERATED
comment.item.0 ADAT1
comment.item.1 Internal
iface PCM
name 'ADAT1 Input Source'
value ADAT1
}
}
On Fri, 2002-04-05 at 02:07, Mark Khemma wrote:
>
> the reason why alsaplayer doesn't work with the hammerfall cards is
> because it can't run full duplex cards with the alsa libs. if i'm wrong,
> please point it out because i'd love to run alsaplayer on my delta 44.
> HOWEVER, if you have an RME card, to get it to work you have to
> build the JACK plugin. apparantly the person who built jack has a
> hammerfall card as
> hardware to test jack on. so alsaplayer WILL work with RME cards only if
> you
> have the jack library built. look it up in the alsaplayer list archives to
> verify what i've said.
>
> i think the call turn out to be something like: alsaplayer -o JACK or
> something like that
>
> On 4 Apr 2002, Bearcat M. Sandor wrote:
>
> > I have a Pioneer 106s DVD drive. I have connected the 2 pin digital out
> > to my RME 96/36 HammerFall sound card. I can play mp3s, oggs, wave files
> > and the sound from mpeg movies through this card to my preamp just fine.
> > However playing Cds and DVDs result in no sound.
> >
> >
> > using gtcd results in no error messages but i get no sound.
> >
> > Alsa player reports:
> > failed to configure output device...trying OSS
> > Closing already opened plugin?!
> >
> > Xine reports:
> > audio_alsa_out: Audio Device name =
> > iec958:AES0=0x6,AES1=0x82,AES2=0x0,AES3=0x2
> > audio_alsa_out: Number of channels = 2
> > ALSA lib pcm.c:1607:(snd_pcm_open_conf) Invalid type for PCM
> > iec958:AES0=0x6,AES1=0x82,AES2=0x0,AES3=0x2 definition (id: iec958,
> > value: cards.pcm.iec958)
> > audio_alsa_out: snd_pcm_open() failed: Invalid argument
> > audio_alsa_out: >>> check if another program don't already use PCM <<<
> > audio_out: open failed!
> >
> > again playing mpeg movies in xine works fine...
> >
> > my alsa modules.conf are as follows:
> >
> > options snd snd_device_gid=29 snd_device_mode=0660 snd_cards_limit=1
> >
> > alias char-major-116 snd
> > alias char-major-14 soundcore
> >
> > alias snd-card-0 snd-rme9652
> > alias sound-slot-0 snd-card-0
> >
> > alias sound-service-0-0 snd-mixer-oss
> > alias sound-service-0-1 snd-seq-oss
> > alias sound-service-0-3 snd-pcm-oss
> > alias sound-service-0-8 snd-seq-oss
> > alias sound-service-0-12 snd-pcm-oss
> >
> > # post-install snd-card-0 /usr/sbin/alsactl restore
> >
> >
> > any ideas would be greatly appreciated!
> >
> > Bearcat M. Sandor
> >
> >
> >
> >
> > _______________________________________________
> > Alsa-user mailing list
> > [EMAIL PROTECTED]
> > https://lists.sourceforge.net/lists/listinfo/alsa-user
> >
>
_______________________________________________
Alsa-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-user