Hi all,
I try to play with my microphone attached to my intel810 soundsystem. But
even with 100% mic volume and +20db gain it is too silent. Is this a known
problem of the I810 Chipset ???
Too silent means, I have to blow directly into the mic to hear anything
... normal speak, even cry load doesn't realy help ...
Thanks in advance
Stefan
[root@voyager cvoicecontrol]# cat /proc/asound/cards
0 [card0 ]: ICH - Intel 82801BA-ICH2
Intel 82801BA-ICH2 at 0xe000, irq 10
[root@voyager cvoicecontrol]# cat /proc/asound/card0/ac97#0
0-0/0: Avance Logic ALC200/200P rev 0
Capabilities : -headphone out-
DAC resolution : 18-bit
ADC resolution : 18-bit
3D enhancement : Realtek 3D Stereo Enhancement
Current setup
Mic gain : +20dB [+20dB]
POP path : pre 3D
Sim. stereo : off
3D enhancement : on
Loudness : off
Mono output : MIX
Mic select : Mic1
ADC/DAC loopback : off
Extended ID : codec=0 rev=1 AMAP DSA=0 SPDIF VRA
Extended status : SPCV SPDIF=3/4 VRA
PCM front DAC : 48000Hz
PCM ADC : 48000Hz
SPDIF Control : Consumer PCM Copyright Category=0x2 Generation=1
Rate=48kHz
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Gadgets, caffeine, t-shirts, fun stuff.
http://thinkgeek.com/sf
_______________________________________________
Alsa-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-user
