ALSA Project Team, i386 system with a SoundBlaster 16 PnP in the only isa card slot. All other slots are PCI. Linux kernel 2.4.18 with sound support as kernel module only (SuSE 8.0). ALSA 0.5x works great when using the --with-isapnp=yes configure option. In addition, SuSE's ALSA 0.5x RPMs work great also. alsaconf modifies /etc/modules.conf correctly; and no irq, dma, etc parameters are required.
Problem: ALSA0.9x wont work at all. I've read all documentation and I am aware of the syntax changes (snd-card-sbawe vs. snd-sbawe for instance). I have not altered my kernel that works with ALSA 0.5x (stock SuSE 7.3 and 8.0; I've tried both!). SuSE's included ALSA rpms dont work. Compiling and installing ALSA 0.9rc3 goes well, but modules wont load; device not found errors are given for snd-sbawe and snd-sb16. I even removed the isapnp.h file before configuring. The kernel sb.o module still works, so it is not a bad card; it has worked for 2 years previously. Lets solve this problem together. My machine is at your disposal. If you can give advice, I will try them and report results back. BTW, I do not have a /etc/isapnp.conf file as my only isa card (this card) was set up satisfactorily by ALSA 0.5x (compiled using --with-isapnp=yes did the trick). Thank you! Chris Pemberton [EMAIL PROTECTED] ------------------------------------------------------- In remembrance www.osdn.com/911/ _______________________________________________ Alsa-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-user
