Kevin,
Although wrong, this setup does produce sound (via system events and
sound recorder - au files only.) I cannot get wavs to play. Again, I
received this setup from a user at Linux-Thinkpad. Perhaps you can help
me fine tune it. 

As requested:

#/sbin/lsmod
Module                  Size  Used by    Not tainted
cs461x                  1840   0 (unused)
gameport                1660   0 [cs461x]
nfsd                   66576   0 (autoclean)
lockd                  46480   0 (autoclean) [nfsd]
sunrpc                 60188   0 (autoclean) [nfsd lockd]
snd                    24804   0
uhci                   24688   0 (unused)
usbcore                58304   0 [uhci]
neofb                  13384   0 (unused)
eepro100               19096   1
ds                      6828   2
yenta_socket            9728   2
pcmcia_core            42272   0 [ds yenta_socket]
af_packet              13000   0 (autoclean)
ide-cd                 28712   0 (autoclean)
cdrom                  26848   0 (autoclean) [ide-cd]
isofs                  25652   0 (autoclean)
inflate_fs             17892   0 (autoclean) [isofs]
supermount             14340   2 (autoclean)
sb                      7668   0
sb_lib                 34958   0 [sb]
uart401                 6628   0 [sb_lib]
sound                  55732   0 [sb_lib uart401]
soundcore               3780   0 [snd sb_lib sound]
rtc                     6560   0 (autoclean)
ext3                   74004   2
jbd                    38452   2 [ext3]

/proc/pci
PCI devices found:
  Bus  0, device   0, function  0:
    Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 3).
      Master Capable.  Latency=64.  
      Prefetchable 32 bit memory at 0x40000000 [0x43ffffff].
  Bus  0, device   1, function  0:
    PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 3).
      Master Capable.  Latency=168.  Min Gnt=136.
  Bus  0, device   2, function  0:
    CardBus bridge: Texas Instruments PCI1251A (rev 0).
      IRQ 11.
      Master Capable.  Latency=168.  Max Lat=5.
      Non-prefetchable 32 bit memory at 0x50102000 [0x50102fff].
  Bus  0, device   2, function  1:
    CardBus bridge: Texas Instruments PCI1251A (#2) (rev 0).
      IRQ 11.
      Master Capable.  Latency=168.  Min Gnt=192.Max Lat=5.
      Non-prefetchable 32 bit memory at 0x50101000 [0x50101fff].
  Bus  0, device   6, function  0:
    Multimedia audio controller: Cirrus Logic CS 4610/11 [CrystalClear SoundFusion 
Audio Accelerator] (rev 1).
      IRQ 11.
      Master Capable.  Latency=32.  Min Gnt=4.Max Lat=24.
      Non-prefetchable 32 bit memory at 0x50100000 [0x50100fff].
      Non-prefetchable 32 bit memory at 0x50000000 [0x500fffff].
  Bus  0, device   7, function  0:
    Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 2).
  Bus  0, device   7, function  1:
    IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 1).
      Master Capable.  Latency=48.  
      I/O at 0xfcf0 [0xfcff].
  Bus  0, device   7, function  2:
    USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 1).
      IRQ 11.
      Master Capable.  Latency=48.  
      I/O at 0x8400 [0x841f].
  Bus  0, device   7, function  3:
    Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 2).
      IRQ 9.
  Bus  1, device   0, function  0:
    VGA compatible controller: Neomagic Corporation [MagicMedia 256AV] (rev 32).
      IRQ 11.
      Master Capable.  Latency=128.  Min Gnt=16.Max Lat=255.
      Prefetchable 32 bit memory at 0xe0000000 [0xe0ffffff].
      Non-prefetchable 32 bit memory at 0x70000000 [0x703fffff].
      Non-prefetchable 32 bit memory at 0x70400000 [0x704fffff].
  Bus  2, device   0, function  0:
    Ethernet controller: PCI device 8086:1229 (rev 9).
      IRQ 11.
      Master Capable.  Latency=64.  Min Gnt=8.Max Lat=56.
      Non-prefetchable 32 bit memory at 0x10400000 [0x10400fff].
      I/O at 0x4000 [0x403f].
      Non-prefetchable 32 bit memory at 0x10420000 [0x1043ffff].

dmesg:
Linux version 2.4.19-16mdk ([EMAIL PROTECTED]) (gcc version 3.2 (Mandrake 
Linux 9.0 3.2-1mdk)) #1 Fri Sep 20 18:15:05 CEST 2002
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000007fd0000 (usable)
 BIOS-e820: 0000000007fd0000 - 0000000007fdf000 (ACPI data)
 BIOS-e820: 0000000007fdf000 - 0000000007fe0000 (ACPI NVS)
 BIOS-e820: 0000000007fe0000 - 0000000008000000 (reserved)
 BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
127MB LOWMEM available.
Advanced speculative caching feature not present
On node 0 totalpages: 32720
zone(0): 4096 pages.
zone(1): 28624 pages.
zone(2): 0 pages.
IBM machine detected. Enabling interrupts during APM calls.
Kernel command line: auto BOOT_IMAGE=linux ro root=301 quiet devfs=nomount
Local APIC disabled by BIOS -- reenabling.
Could not enable APIC!
Initializing CPU#0
Detected 397.059 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 792.98 BogoMIPS
Memory: 126900k/130880k available (1176k kernel code, 3592k reserved, 444k data, 136k 
init, 0k highmem)
Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
CPU: Before vendor init, caps: 0183f9ff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After vendor init, caps: 0183f9ff 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0183f9ff 00000000 00000000 00000000
CPU:             Common caps: 0183f9ff 00000000 00000000 00000000
CPU: Intel Mobile Pentium II stepping 0a
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED])
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfd880, last bus=7
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router PIIX [8086/7110] at 00:07.0
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Starting kswapd
VFS: Diskquotas version dquot_6.5.0 initialized
devfs: v1.12a (20020514) Richard Gooch ([EMAIL PROTECTED])
devfs: boot_options: 0x0
vesafb: framebuffer at 0xe0000000, mapped to 0xc8800000, size 2496k
vesafb: mode is 800x600x16, linelength=1600, pages=1
vesafb: protected mode interface info at c000:a6d0
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Looking for splash picture.... found (800x600, 30412 bytes).
Console: switching to colour frame buffer device 80x16
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ 
SERIAL_PCI ISAPNP enabled
ttyS02 at 0x03e8 (irq = 4) is a 16550A
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xfcf0-0xfcf7, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xfcf8-0xfcff, BIOS settings: hdc:DMA, hdd:pio
hda: HITACHI_DK229A-10, ATA DISK drive
hdc: TOSHIBA CD-ROM XM-1902B, ATAPI CD/DVD-ROM drive
ide2: ports already in use, skipping probe
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 19640880 sectors (10056 MB) w/512KiB Cache, CHS=1299/240/63, UDMA(33)
Partition check:
 /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 >
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 8192 bind 16384)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 121k freed
VFS: Mounted root (ext2 filesystem).
Journalled Block Device driver loaded
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 136k freed
Real Time Clock Driver v1.10e
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,1), internal journal
Adding Swap: 249440k swap-space (priority -1)
Soundblaster audio driver Copyright (C) by Hannu Savolainen 1993-1996
sb: No ISAPnP cards found, trying standard ones...
SB 3.02 detected OK (220)
This sound card may not be fully Sound Blaster Pro compatible.
In many cases there is another way to configure OSS so that
it works properly with OSS (for example in 16 bit mode).
Please ignore this message if you _really_ have a SB Pro.
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,6), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
hdc: ATAPI 24X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
hdc: packet command error: status=0x51 { DriveReady SeekComplete Error }
hdc: packet command error: error=0x50
ATAPI device hdc:
  Error: Illegal request -- (Sense key=0x05)
  Invalid field in command packet -- (asc=0x24, ascq=0x00)
  The failed "Start/Stop Unit" packet command was: 
  "1b 00 00 00 03 00 00 00 00 00 00 00 "
  Error in command packet byte 4 bit 0
cdrom: open failed.
Linux Kernel Card Services Kernel Version
  options:  [pci] [cardbus] [pm]
PCI: Found IRQ 11 for device 00:02.0
PCI: Sharing IRQ 11 with 00:06.0
PCI: Sharing IRQ 11 with 01:00.0
PCI: Found IRQ 11 for device 00:02.1
Yenta IRQ list 0698, PCI irq11
Socket status: 30000020
Yenta IRQ list 0698, PCI irq11
Socket status: 30000006
cs: cb_alloc(bus 2): vendor 0x8086, device 0x1229
PCI: Enabling device 02:00.0 (0000 -> 0003)
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x130-0x137 0x200-0x207 0x388-0x38f 
0x3b8-0x3df 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin 
<[EMAIL PROTECTED]> and others
PCI: Setting latency timer of device 02:00.0 to 64
eth0: PCI device 8086:1229, 00:D0:B7:02:36:EE, IRQ 11.
  Receiver lock-up bug exists -- enabling work-around.
  Board assembly 730155-001, Physical connectors present: RJ45
  Primary interface chip i82555 PHY #1.
  General self-test: passed.
  Serial sub-system self-test: passed.
  Internal registers self-test: passed.
  ROM checksum self-test: passed (0xdbd8681d).
  Receiver lock-up workaround activated.
PCI: Found IRQ 11 for device 01:00.0
PCI: Sharing IRQ 11 with 00:02.0
PCI: Sharing IRQ 11 with 00:06.0
neofb: mapped io at c8c59000
Panel is a 1024x768 color TFT display
neofb: frame buffer in use
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
uhci.c: USB Universal Host Controller Interface driver v1.1
PCI: Found IRQ 11 for device 00:07.2
uhci.c: USB UHCI at I/O 0x8400, IRQ 11
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 11 for device 00:06.0
PCI: Sharing IRQ 11 with 00:02.0
PCI: Sharing IRQ 11 with 01:00.0
Crystal 4280/46xx + AC97 Audio, version 1.28.32, 18:47:20 Sep 20 2002
cs46xx: Card found at 0x50100000 and 0x50000000, IRQ 11
cs46xx: Thinkpad 600E (unsupported) (1014:1010) at 0x50100000/0x50000000, IRQ 11
Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]).
cs46xx: create - never read card ready from AC'97
cs46xx: probably not a bug, try using the CS4232 driver,
cs46xx: or turn off any automatic Power Management support in the BIOS.
cs46xx: create - never read card ready from AC'97
cs46xx: probably not a bug, try using the CS4232 driver,
cs46xx: or turn off any automatic Power Management support in the BIOS.
cs46xx: create - never read card ready from AC'97
cs46xx: probably not a bug, try using the CS4232 driver,
cs46xx: or turn off any automatic Power Management support in the BIOS.
cs46xx: create - never read card ready from AC'97
cs46xx: probably not a bug, try using the CS4232 driver,
cs46xx: or turn off any automatic Power Management support in the BIOS.
hdc: packet command error: status=0x51 { DriveReady SeekComplete Error }
hdc: packet command error: error=0x50
ATAPI device hdc:
  Error: Illegal request -- (Sense key=0x05)
  Invalid field in command packet -- (asc=0x24, ascq=0x00)
  The failed "Start/Stop Unit" packet command was: 
  "1b 00 00 00 03 00 00 00 00 00 00 00 "
  Error in command packet byte 4 bit 0
cdrom: open failed.
cs46xx: create - never read card ready from AC'97
cs46xx: probably not a bug, try using the CS4232 driver,
cs46xx: or turn off any automatic Power Management support in the BIOS.
cs46xx: cs46xx_probe()- cs_hardware_init() failed, retried 5 times.
cs46xx: probe()- no device allocated
cs46xx: Unable to detect valid cs46xx device
PCI: Found IRQ 11 for device 00:06.0
PCI: Sharing IRQ 11 with 00:02.0
PCI: Sharing IRQ 11 with 01:00.0
CS461x PCI: 50100000[8192]
gameport0: CS461x Gameport speed 1455 kHz
Splash status on console 0 changed to off
CS4232 soundcard not found or device busy



-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
Alsa-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-user

Reply via email to