[EMAIL PROTECTED] wrote: > > > if I try to record 5 seconds at 48000, it takes 30 > > > seconds, at 8000Hz. > > > > Please post the contents of /proc/asound/cardX/stream0 while recording. > > Here it is: > > Creative Technology Ltd. : USB Audio > ... > Capture: > Status: Running > Interface = 2 > Altset = 1 > URBs = 5 [ 4 4 4 4 4 ] > Packet Size = 200 > Momentary freq = 48,000 Hz > Interface 2 > Altset 1 > Format: S16_LE > Channels: 2 > Endpoint: 6 IN (ASYNC) > Rates: 8000, 16000, 24000, 32000, 48000
IIRC I've seen information about another Extigy that had one altset per sample rate. What firmware version does your Extigy have? Did you try upgrading to the latest version (V1.1.020507)? > > > Also, I don't see any midi devices in /proc/asound, and they aren't > > > listed by pmidi -l. > > > > The Extigy doesn't conform to the USB MIDI specification. > > You could ask Creative how to access the MIDI port. Well, you could try. > > It's wierd, because I actually had extigy midi io working, as well as > only 44100 Hz (??? why not 8/16/24/31/48k?) audio io, before I backed > up my drive and restored on a new partition. I didn't do anything > fancy, that's just how it worked. I've now seen other reports of working MIDI ports. I think this is caused by a different firmware version. HTH Clemens ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Alsa-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-user
