yes, my bios config seems to set some unusual ports, which might be part of the problem - i have irq=9...
i might try the alsaconf script - never used it before, always worked by hand...
best
m~
Takashi Iwai wrote:
At Wed, 05 Feb 2003 10:06:46 +0000, iriXx wrote:err... are you running a thinkpad 600e by any chance? im still trying to get mine working....you need to set up the module options correctly. you can try the below. options snd-cs4236 port=0x530 cport=0x538 irq=5 dma1=1 dma2=0 \ isapnp=0 sb_port=-1 mpu_port=-1 fm_port=-1 the port, irq and dmas are depending on the bios configuration, though. you can try alsaconf script included in alsa-driver/utils, too. Takashi
-- iriXx www.iriXx.org copyleft: creativity, technology and freedom? [EMAIL PROTECTED] www.copyleftmedia.org.uk _ ( ) ascii ribbon against html email X / \ cat /dev/sda1 > /dev/dsp *** stopping make sense *** ------------------------------------------------------- This SF.NET email is sponsored by: SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See! http://www.vasoftware.com _______________________________________________ Alsa-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-user
