Hi, I'm getting more aand more desperate ;( Clemens Ladisch schrieb: > I looked at the driver from Edirol's website, and it definitely uses 0025 > as product ID, so the above isn't a typo. > > But the picture on the website shows that the UA-20 has an "Advanced > Driver" switch. I don't know its purpose, but I'd guess MIDI is only > available in the other position.
I'm sitting at work currently - don't tell anyone! - where I installed the UA-20 MME driver on Win2000. Here midi works in "Advanced Driver" mode, which is recommended by Edirol's README (maybe it is required). Midi works, I tested it with a Phil-Rees Faderbox and Pd. Then I kept the Advanced Mode switch in on position, connected it all to my ALSA notebook, and the Edirol isn't recognized at all, I don't even get sound, midi doesn't work neither, there's nothing regarding Edirol in /proc/asound/... When I dicconnect the device and plug it in again, /var/log/messages tells me, that usb.c has found a new device, but no driver claims this. /proc/bus/usb/devices shows this: [...] S: SerialNumber=aca0 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=ff(vend.) Sub=00 Prot=ff MxPS= 8 #Cfgs= 1 P: Vendor=0582 ProdID=0025 Rev= 1.01 S: Manufacturer=Roland S: Product=EDIROL UA-20 C:* #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=170mA I: If#= 0 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=01 Prot=00 Driver=(none) I: If#= 1 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=02 Prot=00 Driver=(none) I: If#= 1 Alt= 1 #EPs= 1 Cls=ff(vend.) Sub=02 Prot=00 Driver=(none) E: Ad=01(O) Atr=09(Isoc) MxPS= 288 Ivl=1ms I: If#= 2 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=02 Prot=00 Driver=(none) I: If#= 2 Alt= 1 #EPs= 1 Cls=ff(vend.) Sub=02 Prot=00 Driver=(none) E: Ad=82(I) Atr=05(Isoc) MxPS= 288 Ivl=1ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=03 Prot=00 Driver=(none) E: Ad=03(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms I: If#= 3 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=03 Prot=00 Driver=(none) E: Ad=03(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 32 Ivl=1ms As you see, there now is a ProdID of 0025 again, so I will now (after I've eaten someting) remove my change in usbquirks.h to try it with 0025 again. But in my very first try I did have the UA-20 in Advanced Mode, and didn't have succes then either. ciao -- Frank Barknecht ------------------------------------------------------- This SF.net email is sponsored by: SlickEdit Inc. Develop an edge. The most comprehensive and flexible code editor you can use. Code faster. C/C++, C#, Java, HTML, XML, many more. FREE 30-Day Trial. www.slickedit.com/sourceforge _______________________________________________ Alsa-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-user
