Hi Johannes,

output of 4 seperate channels on the xfire should work since alsa version
from Thu May 15 13:16:00 2003 UTC (2 months ago).
I don't remeber which alsa version i've installed  (0.9.4 ?) and 4 channel
output works for me, i.e. i can use the device surround40 to output 4 channel
surround sound. This is a mandrake9.1 installation. i can use the rear
channels as intended with xine, mplayer, ac3dec, a52dec or using aplay -D hw:0,1
...

If your alsa version is older than 2 months, you'll have to update,
otherwise, it should work. If it doesn't, then your codec isn't set into extended
mode for some reason (e.g. other codec on your card? driver didn't recognize
that you're using a cs46xx card with one codec only? some other reason? Perhaps
you can recompile alsa-drivers with --debug=detect and look at the messages
in /var/log/... for some information)
your problem should be solvable ;)
HTH,
fe

-- 
+++ GMX - Mail, Messaging & more  http://www.gmx.net +++

Jetzt ein- oder umsteigen und USB-Speicheruhr als Prämie sichern!



-------------------------------------------------------
This SF.net email is sponsored by: VM Ware
With VMware you can run multiple operating systems on a single machine.
WITHOUT REBOOTING! Mix Linux / Windows / Novell virtual machines at the
same time. Free trial click here: http://www.vmware.com/wl/offer/345/0
_______________________________________________
Alsa-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-user

Reply via email to