>-----Original Message----- >From: Takashi Iwai [mailto:[EMAIL PROTECTED] >Sent: 10 September 2003 13:47 >To: Ben Tisdall >Cc: [EMAIL PROTECTED] >Subject: Re: [Alsa-user] snd-opl3sa2.o doesn't load on alsa restart > > >At Wed, 10 Sep 2003 13:30:32 +0100, >Ben Tisdall wrote: >> >> >-----Original Message----- >> >From: Takashi Iwai [mailto:[EMAIL PROTECTED] >> >Sent: 10 September 2003 13:15 >> >To: Ben Tisdall >> >Cc: [EMAIL PROTECTED] >> >Subject: Re: [Alsa-user] snd-opl3sa2.o doesn't load on alsa restart >> > >> > >> >At Wed, 10 Sep 2003 10:01:21 +0100, >> >Ben Tisdall wrote: >> >> >> >> I use two cards on my system, opl3sa2 & cs4281 and recently >upgraded from >> >> 0.9.0rc2 to 0.9.6 >> >> >> >> Although both drivers load fine at boot time, if I restart >Alsa, opl3sa2 >> >> fails to load: >> [snip] >> >> Any ideas? >> > >> >it's a bug of pnp wrapper module. >> >already fixed on the cvs. >> >> Thanks, working fine now under kernel 2.4.21, however... >> >> ...the behaviour still seems to persist under kernel 2.4.22, to >which I've >> just upgraded. >> >> I'm still using 0.9.6 for libs/utils etc, but presumably this isn't as an >> issue as it's ok under 2.4.21? > >no, it shouldn't be. >are you sure that you built/installed the latest ALSA drivers for >2.4.22, too?
Yes, quite sure, but... recompiled and reinstalled, all's well under 2.4.22 too. I have sneaking suspicion I ommitted to do 'make install' the first time round and the 0.9.6 drivers were still there - doh! Thanks for your help Takashi. Best regards, Ben. ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Alsa-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-user
