I use two cards on my system, opl3sa2 & cs4281 and recently upgraded from 0.9.0rc2 to 0.9.6
Although both drivers load fine at boot time, if I restart Alsa, opl3sa2 fails to load: jitter:/home/bentis# Starting sound driver: snd-opl3sa2 /lib/modules/2.4.21/kernel/sound/isa/snd-opl3sa2.o: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg jitter:/home/bentis# Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. /lib/modules/2.4.21/kernel/sound/isa/snd-opl3sa2.o: insmod /lib/modules/2.4.21/kernel/sound/isa/snd-opl3sa2.o failed /lib/modules/2.4.21/kernel/sound/isa/snd-opl3sa2.o: insmod snd-opl3sa2 failed Starting sound driver: snd-cs4281 done dmesg shows this: ALSA ../alsa-kernel/isa/opl3sa2.c:667: PnP configure failure (out of resources?) err = -16 ALSA ../alsa-kernel/isa/opl3sa2.c:904: Yamaha OPL3-SA soundcard not found or device busy Any ideas? Ben Tisdall -- NP::Clicks & Cuts Volume 1//Various ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Alsa-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-user
