I have a creative soundblaster 16. When I do a: modprobe snd-sb16 snd_port=0x220 snd_mpu_port=0x330 snd_irq=5 snd_dma8=3 snd_dma16=7
I get: /lib/modules/2.4.20/alsa/snd-sb16.o: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters /lib/modules/2.4.20/alsa/snd-sb16.o: insmod /lib/modules/2.4.20/alsa/snd-sb16.o failed /lib/modules/2.4.20/alsa/snd-sb16.o: insmod snd-sb16 failed I am sure about the port and the mpu_port, because I manually set it to this with jumpers. I am also pretty sure about the irq and dma8 and dma16, because I wrote it down from my old windows98 installation. Do you have any idea how I could trace my mistake? I already played with sndconfig and pnpdump without any results, and I am also insecure if that was the right direction Thank you in advance, Jens ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Alsa-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-user
