Upgrade to 2.6.0-test5. It works. On Mon, 22 Sep 2003 00:45:19 -0400 (EDT) Lee Azzarello <[EMAIL PROTECTED]> wrote:
> Actually, I'd like to liven this thread up a bit. I am not using arts, nor > do I intend to and I have a via 8223 built in card (I also have a M-Audio > Delta 1010 and it's working great, big ups to the ALSA programmers). > > But the via card isn't working well at all. I've tried setting the > dxs_support options to 2 and 3, still I get static. I've also noticed that > not only do I get static, but the sample rate of the card is 48khz because > the singers sound like chipmunks in all my music at 44.1. > > I can live with the static, but any advice on how to force the sample rate > on the card to 44.1 or do resampling on the ALSA level? > > -l[e^2] > ------------------------------ > http://www.fallingforward.net/ > people experimenting with music, art and technology > > On Wed, 17 Sep 2003, Nick Peaden wrote: > > > I know this thread is dead, but for my problem, later I removed arts and then > > install 2.6.0-test5 compiled with the ALSA drivers, and slightly modded my > > .asoundrc to make this work without any distortion/static/white noice/weird > > anything. > > > > On Sun, 14 Sep 2003 12:00:23 -0400 > > Nick Peaden <[EMAIL PROTECTED]> wrote: > > > > > Ok, I have it fixed, I have to run arts on top of alsa to even get rid of all > > > teh static! > > > > > > On Sat, 13 Sep 2003 21:02:49 -0400 > > > Nick Peaden <[EMAIL PROTECTED]> wrote: > > > > > > > In XMMS, it shows 2 devices with the ALSA output plugin. If I select the > > > > second one with mmap off, and with the .asoundrc of: > > > > > > > > pcm.via82xx { > > > > type hw > > > > card 0 > > > > device 1 > > > > } > > > > > > > > ctl.via82xx { > > > > type hw > > > > card 0 > > > > } > > > > > > > > I get no static. Is there a way to set all other applications to use the same > > > > device XMMS is using? > > > > On Fri, 12 Sep 2003 22:41:21 -0400 > > > > Nick Peaden <[EMAIL PROTECTED]> wrote: > > > > > > > > > In XMMS, the second device (Which would be nice to use as the primary) runs > > > > > static free. This is a VIA 8233 / AC '97 codec sound system. > > > > > > > > > > On Fri, 12 Sep 2003 21:57:57 -0400 > > > > > Nick Peaden <[EMAIL PROTECTED]> wrote: > > > > > > > > > > > > > > > > > > > > > > > I think I've tried everything in ALSA to retard static from ALSA, but I > > > > > > always keep getting it. I was wondering what I should set my driver and > > > > > > .asoundrc to to convert all sound to 48KHz? 48KHz plays clearly. > > > > > > > > > > > > > > > > > > ------------------------------------------------------- > > > > > > This sf.net email is sponsored by:ThinkGeek > > > > > > Welcome to geek heaven. > > > > > > http://thinkgeek.com/sf > > > > > > _______________________________________________ > > > > > > Alsa-user mailing list > > > > > > [EMAIL PROTECTED] > > > > > > https://lists.sourceforge.net/lists/listinfo/alsa-user > > > > > > > > > > > > > > > ------------------------------------------------------- > > > > > This sf.net email is sponsored by:ThinkGeek > > > > > Welcome to geek heaven. > > > > > http://thinkgeek.com/sf > > > > > _______________________________________________ > > > > > Alsa-user mailing list > > > > > [EMAIL PROTECTED] > > > > > https://lists.sourceforge.net/lists/listinfo/alsa-user > > > > > > > > > > > > ------------------------------------------------------- > > > > This sf.net email is sponsored by:ThinkGeek > > > > Welcome to geek heaven. > > > > http://thinkgeek.com/sf > > > > _______________________________________________ > > > > Alsa-user mailing list > > > > [EMAIL PROTECTED] > > > > https://lists.sourceforge.net/lists/listinfo/alsa-user > > > > > > > > > ------------------------------------------------------- > > > This sf.net email is sponsored by:ThinkGeek > > > Welcome to geek heaven. > > > http://thinkgeek.com/sf > > > _______________________________________________ > > > Alsa-user mailing list > > > [EMAIL PROTECTED] > > > https://lists.sourceforge.net/lists/listinfo/alsa-user > > > > > > ------------------------------------------------------- > > This sf.net email is sponsored by:ThinkGeek > > Welcome to geek heaven. > > http://thinkgeek.com/sf > > _______________________________________________ > > Alsa-user mailing list > > [EMAIL PROTECTED] > > https://lists.sourceforge.net/lists/listinfo/alsa-user > > > > > > ------------------------------------------------------- > This sf.net email is sponsored by:ThinkGeek > Welcome to geek heaven. > http://thinkgeek.com/sf > _______________________________________________ > Alsa-user mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/alsa-user ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Alsa-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-user
