Hi Ingo,
I do not think there are large differences between the normal and
Platinum eX versions of the Audigy2. Here's my
/proc/asound/Audigy2/emu10k1 output, which I think is very similar to
yours:
EMU10K1
Card : Audigy
Internal TRAM (words) : 0x2000
External TRAM (words) : 0x0
Effect Send Routing : A=0, B=1, C=2, D=3
Captured FX Outputs :
Output 00 [PCM Left]
Output 12 [MIDI Reverb]
All FX Outputs :
Output 00 [PCM Left]
Output 01 [PCM Right]
Output 02 [PCM Surround Left]
Output 03 [PCM Surround Right]
Output 04 [MIDI Left]
Output 05 [MIDI Right]
Output 06 [PCM Center]
Output 07 [PCM LFE]
Output 08 [???]
Output 09 [???]
Output 10 [???]
Output 11 [???]
Output 12 [MIDI Reverb]
Output 13 [MIDI Chorus]
Output 14 [???]
Output 15 [???]
Output 16 [???]
Output 17 [???]
Output 18 [ADC Left / CDROM S/PDIF Left]
Output 19 [ADC Right / CDROM S/PDIF Right]
Output 20 [MIC / Zoom Video Left]
Output 21 [Zoom Video Right]
Output 22 [S/PDIF Left]
Output 23 [S/PDIF Right]
Output 24 [???]
Output 25 [???]
Output 26 [???]
Output 27 [???]
Output 28 [???]
Output 29 [???]
Output 30 [???]
Output 31 [???]
S/PDIF Output 0
Professional Mode : no
Not Audio Data : no
Copyright : yes
Emphasis : none
Mode : 0
Category Code : 0x12
Generation Status : original
Source Mask : 0
Channel Number : left
Sample Rate : 48000Hz
Clock Accuracy : 1000ppm
S/PDIF Output 1
Professional Mode : no
Not Audio Data : no
Copyright : yes
Emphasis : none
Mode : 0
Category Code : 0x12
Generation Status : original
Source Mask : 0
Channel Number : left
Sample Rate : 48000Hz
Clock Accuracy : 1000ppm
S/PDIF Output 2/3
Professional Mode : no
Not Audio Data : no
Copyright : yes
Emphasis : none
Mode : 0
Category Code : 0x12
Generation Status : original
Source Mask : 0
Channel Number : left
Sample Rate : 48000Hz
Clock Accuracy : 1000ppm
CD-ROM S/PDIF
Professional Mode : yes
Not Audio Data : yes
Copyright : yes
Emphasis : 7
Mode : 3
Category Code : 0x7f
Generation Status : original
Source Mask : 15
Channel Number : 15
Sample Rate : 15Hz
Clock Accuracy : unknown
S/PDIF Locked : off
Rate Locked : off
Estimated Sample Rate : 0x0
General purpose S/PDIF
Professional Mode : yes
Not Audio Data : yes
Copyright : yes
Emphasis : 7
Mode : 3
Category Code : 0x7f
Generation Status : original
Source Mask : 15
Channel Number : 15
Sample Rate : 15Hz
Clock Accuracy : unknown
S/PDIF Locked : off
Rate Locked : off
Estimated Sample Rate : 0x0
Zoomed Video
Rate Locked : off
Estimated Sample Rate : 0x0
Regards,
Lionel
Ingo Reimann wrote:
Hi Lionel,
Well normally, i use xine as my favourity player, but also here, i dont`t hear
anything. Maybe it is just is simple error, but i started even from scratch,
removing my local xine-Configuration. i may switch on digital passthrough, but
my amp does not get any signal. Yes, it works under M$, yes, it worked with my
old Sblive5.1!
I don`t have a Platinum eX, but an orginary Audigy 2 , but i doubt, that there
are large differences..
Could you show me the output of your /proc/asound/Audigy2/emu10k1? Maybe i find
some differences..
Thanks for your help,
Ingo
Zitat von Lionel Lam <[EMAIL PROTECTED]>:
Hi Ingo,
I am using the Audigy2 Platinum eX and I managed to get ac3 passthrough
using Xine and alsa. My connection to an external decoder is done via
the mini-jack digital output on the breakout box of the soundcard, not
via the RCA SPDIF output jack. Dolby Digital works perfectly, however
DTS passthrough seems a little buggy. The decoder detects DTS signals,
however the sound output is distorted. I have not managed to get ac3
passthrough using MPlayer at the moment. The passthrough should work
without any fiddling of alsamixer. I do not have my configuration files
at the moment as I am currently at work. I suggest that you try using
Xine to see if ac3 passthrough works on your Audigy2, and I have no
reason to doubt that it should not if alsa loads without any problems.
Ingo Reimann wrote:
Hi list,
i just wanted to ask whether there is any progress in the Audigy2 and
ac3-passthrough issue.
After screening alsa-user, alsa-devel and also mplayer-uers i am not
much happier. I read about a few people, that use toe optical optput on
their live-drive, but i only have the "Digital / Analog Output Jack"
Would anyone, who managed to use this with his external decoder, be so
kind to describe his configuration. Or are we just casing a ghost?
cat /proc/asound/ says something about spdif, but when i send anything
other than pure pcm to the device, i get no output from my amp.
[EMAIL PROTECTED]:~/ftp$ ac3dec -P test.ac3
Using PCM device 'plug:iec958:{AES0 0x87 AES1 0x0 AES2 0x0 AES3 0x0}'
AC3 Stream 48.0 KHz 192 kbps
-> Silence
Aborted...
[EMAIL PROTECTED]:~/ftp$ ac3dec -C test.ac3
Using PCM device 'plug:iec958:{AES0 0x2 AES1 0x82 AES2 0x0 AES3 0x2}'
AC3 Stream 48.0 KHz 192 kbps
-> Silence
[EMAIL PROTECTED]:~/ftp$ ac3dec -R test.ac3
2.0 Mode 48.0 KHz 192 kbps Complete Main Audio Service
Using PCM device 'plug:iec958:{AES0 0x0 AES1 0x82 AES2 0x0 AES3 0x2}'
-> PCM Stereo , no matter how i set "Audigy Analog/Digital Output Jack"
and " and "IEC958 Optical Raw" Switches with alsamixer
Any help would be kindly accepted
best wishes,
Ingo
[EMAIL PROTECTED]:~/ftp$ cat /proc/asound/Audigy2/emu10k1
EMU10K1
Card : Audigy
Internal TRAM (words) : 0x2000
External TRAM (words) : 0x0
Effect Send Routing : A=0, B=1, C=2, D=3
Captured FX Outputs :
Output 00 [PCM Left]
Output 12 [MIDI Reverb]
All FX Outputs :
Output 00 [PCM Left]
Output 01 [PCM Right]
Output 02 [PCM Surround Left]
Output 03 [PCM Surround Right]
Output 04 [MIDI Left]
Output 05 [MIDI Right]
Output 06 [PCM Center]
Output 07 [PCM LFE]
Output 08 [???]
Output 09 [???]
Output 10 [???]
Output 11 [???]
Output 12 [MIDI Reverb]
Output 13 [MIDI Chorus]
Output 14 [???]
Output 15 [???]
Output 16 [???]
Output 17 [???]
Output 18 [ADC Left / CDROM S/PDIF Left]
Output 19 [ADC Right / CDROM S/PDIF Right]
Output 20 [MIC / Zoom Video Left]
Output 21 [Zoom Video Right]
Output 22 [S/PDIF Left]
Output 23 [S/PDIF Right]
Output 24 [???]
Output 25 [???]
Output 26 [???]
Output 27 [???]
Output 28 [???]
Output 29 [???]
Output 30 [???]
Output 31 [???]
S/PDIF Output 0
Professional Mode : no
Not Audio Data : no
Copyright : yes
Emphasis : none
Mode : 0
Category Code : 0x2
Generation Status : original
Source Mask : 0
Channel Number : unspec
Sample Rate : 48000Hz
Clock Accuracy : 1000ppm
S/PDIF Output 1
Professional Mode : no
Not Audio Data : no
Copyright : yes
Emphasis : none
Mode : 0
Category Code : 0x12
Generation Status : original
Source Mask : 0
Channel Number : left
Sample Rate : 48000Hz
Clock Accuracy : 1000ppm
S/PDIF Output 2/3
Professional Mode : no
Not Audio Data : no
Copyright : yes
Emphasis : none
Mode : 0
Category Code : 0x12
Generation Status : original
Source Mask : 0
Channel Number : left
Sample Rate : 48000Hz
Clock Accuracy : 1000ppm
CD-ROM S/PDIF
Professional Mode : yes
Not Audio Data : yes
Copyright : yes
Emphasis : 7
Mode : 3
Category Code : 0x7f
Generation Status : original
Source Mask : 15
Channel Number : 15
Sample Rate : 15Hz
Clock Accuracy : unknown
S/PDIF Locked : off
Rate Locked : off
Estimated Sample Rate : 0x0
General purpose S/PDIF
Professional Mode : yes
Not Audio Data : yes
Copyright : yes
Emphasis : 7
Mode : 3
Category Code : 0x7f
Generation Status : original
Source Mask : 15
Channel Number : 15
Sample Rate : 15Hz
Clock Accuracy : unknown
S/PDIF Locked : off
Rate Locked : off
Estimated Sample Rate : 0x0
Zoomed Video
Rate Locked : off
Estimated Sample Rate : 0x0
-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
_______________________________________________
Alsa-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-user
|
