Hi, Good to hear, I will install Suse - do you think the latest version will also work, or should I stick with 9.x - on the box and will try these configs. I'll let you know whether it is working or not. If it's working I'll create a how-to and publish that.
Thanks and Cheers, Eduard > Von: Friedrich_Ewaldt <[EMAIL PROTECTED]> > Datum: Tue, 05 Sep 2006 12:16:34 +0200 > An: Eduard van den Bongard <[EMAIL PROTECTED]> > Cc: "D.Tamm" <[EMAIL PROTECTED]>, [email protected] > Betreff: Re: [Alsa-user] Is the RME Digi9652 supported ? [signed] > > on 09/05/2006 10:55 AM, Eduard van den Bongard wrote: > >> Hi there, >> >> Thanks for these hints. Your are the first person except the developers of >> the driver who tells me that an RME card is working as expected, so new hope >> is risig..... > I've been using RME digi9652, hdsp9652 and the laptop interface (with > digiface and multiface) without serious problems. >> >> I am using a 9636 so I have to use the rme9652driver and I assume that you >> are using the hdsp driver for your card. > For the digi9652 I use the snd_rme9652 module (the hdsp9652 config was > just as an example from the www) > > ~>lsmod | grep rme > > snd_rme9652 33604 0 > snd_pcm 108676 2 snd_pcm_oss,snd_rme9652 > snd 70788 5 > snd_pcm_oss,snd_mixer_oss,snd_rme9652,snd_pcm,snd_timer > snd_page_alloc 14340 2 snd_rme9652,snd_pcm > > >> I have tried some different versions of .asoundrc, beginning with this one >> http://www.alsa-project.org/alsa-doc/doc-php/asoundrc.php?module=rme9652, >> http://alsa.opensrc.org/index.php?page=TwoCardsAsOne >> http://interactive.linuxjournal.com/article/8234 > I don't know if dmix works on the rme cards, never tried it. > You only need the multi plugin if you want to combine two or more > soundcards in one logic device. If you only have one digi card, don't > use the multi definitions. >> and some other .asoundrc files, assuming, that the underlying concept of >> ttable is also valid for the rme card. > For me ttable works. > Wherever needed I deleted the >> configurations for more that one card. After that I tried to play sounds via >> aplay -D DEVICENAME WAVE File. Whatever configuration I used the sound only >> was given out via the first stereo pair. > Strange. > > The RME card is the first in the PC (card 0): > ~> cat proc/asound/cards > > 0 [R15 ]: RME9652 - RME Digi9652 (Rev 1.5) > RME Digi9652 (Rev 1.5) at 0xda000000, irq 177 > > > Here's a device definition in my .asoundrc: > pcm.test_mono { > type plug > ttable.0.10 0.1 > slave.pcm { > type hw > card 0 > } > route_policy copy > } > > Then > aplay some_mono_testfile.wav -D test_mono > plays through the 3rd channel of the second adat output as expected. > (first adat are channels 0..7, 2nd adat starts with 8..) > No error was thrown, aplay states >> always that is was playing the file .Dmix configurations weren't working at >> all. > Then dmix maybe doesn't work on rme cards. I don't know. >> > ... [some examples I didn't test] >> >> >> I have tried that with Ubuntu 6.0.6 and alsa 1.0.10, as well as with a >> Knoppix 5.0 Live DVD and alsa 1.0.11. >> After getting in contact with Paul Davis - who was very responsive - thanks >> again, I tried to get jackd up and running, starting with the following >> .asoundrc: >> >> pcm.jackplug { >> type plug >> slave { pcm "jack" } >> } >> >> pcm.jack { >> type jack >> playback_ports { >> 0 alsa_pcm:playback_1 >> 1 alsa_pcm:playback_2 >> } >> capture_ports { >> 0 alsa_pcm:capture_1 >> 1 alsa_pcm:capture_2 >> } >> } >> >> But without luck. >> >> Would it be possible that you post your configurations for alsa and jackd, >> so that I can try out that with my hammerfall light? >> > alsa: see above > jackd: > > pcm.hammerfall { > type hw > card 0 > } > > ctl.hammerfall { > type hw > card 0 > } > > and starting jackd 0.99.0 with > jackd -d alsa -d hammerfall > OR > jackd -d alsa -d hw:0 > WorksForMe > > With multi decive definitions and newer alsa versions there are problems > starting jackd in duplex mode. The soultion can be found on the web. But > with only one card at a time there shouldn't be problems. >> >> Basically, what would be perfect from my point of view is a possibility to >> enhance the RME driver in a way that the devices of the soundcard are >> directly accessible like it is possible for a huge set of 'consumer' >> soundcards, but I would be happy if there is a way or a set of config files >> that enables me to play sounds on the channels I want with whatever >> player... >> >> Thanks and Cheers, >> Eduard >> >> > > ------------------------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 _______________________________________________ Alsa-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/alsa-user
