Am 04.06.19 um 08:54 schrieb Clemens Ladisch via Alsa-user:
> Stefan Sauer wrote:
>> 'lsusb' shows the device as:
>> Bus 006 Device 003: ID 086a:0001 Emagic Soft- und Hardware GmbH Unitor8
>> 'amidi -l' shows a human readable name for all midi devices, but the 'Emagic
>> Unitor amt 8' (hw:4,0) show up with a generic name:
>> Dir Device    Name
>> IO  hw:4,0,0  USB Device 0x86a:0x01 MIDI 1
> lsusb has a database of names.
> The snd-usb-audio driver asks the device for what its name is.  You can
> see these values in the output of "sudo lsusb -v" for "iManufacturer"/
> "iProduct".  (Please check this.)  When these values cannot be read, you
> get that "USB Device" name.
> It is possible to override this name by adding a .product_name entry
> in the sound/usb/quirks-table.h file and recompiling the kernel.
> (At least the MT4 does not need this override.  If the Unitor8 or the
> AMT8 require it, this change can be made permanent.)
> Regards,
> Clemens
Thanks for the quick reply, lets see if the usbids can be updated


Alsa-user mailing list

Reply via email to