Clay & Carly Dunsworth <[email protected]> writes: > I am having to re-wire the whole thing, since my last altimeter would mount > larger wires, I used some 16ga machine tool twire. (since it has really > good properties). This won't do for the telemetrum. > > Is there any way to check that the accellerometer and baro-sensor are > working prior to flight. ESD has gotten me before on another altimeter and > the Baro was not working properly, so i always verify the baro sensor prior > to flight... ususaly with a straw, so i can see the change in rate.
You can suck on the baro sensor and trigger a launch detect in pad mode, and you can swing the altimeter around to trigger it via the accelerometer. This will record 'flights' in the on-board memory, which you'll want to clear out before actually going to fly :-) -- [email protected]
pgpc6gBKwYGci.pgp
Description: PGP signature
_______________________________________________ altusmetrum mailing list [email protected] http://lists.gag.com/mailman/listinfo/altusmetrum
