Casey Barker <ca...@barkerzone.com> writes: > Hey Winton, this was also my first question to the altusmetrum list, about > 2 years ago. :) > > Don't curve it around or dangle it outside. Just drill a hole in the > bulkhead and run it up next to the chute, then use some RTV or glue to seal > the bulkhead hole and prevent residue from getting into the bay.
I've glued a piece of acrylic tubing to a hole in the bulkhead for one airframe; the antenna wire slips up inside that nicely and the chute packs around it without too much trouble. It's survived probably a dozen flights with the BP charge going off right next to the tubing. Useful if you need to pull that bulkhead off the ebay. I've also gone 'naked' without the tubing and I've found the wire tangled up after flight most of the time; not sure what I'm doing wrong, but clearly it's not working for me like it does for others. -keith
pgpFTSEubGR0G.pgp
Description: PGP signature
_______________________________________________ altusmetrum mailing list altusmetrum@lists.gag.com http://lists.gag.com/mailman/listinfo/altusmetrum