Yes, it was bought about two weeks ago. No one near me to test this out with though :-(
Kieran > On 31 Jul 2014, at 16:46, Bdale Garbee <[email protected]> wrote: > > Kieran Sullivan <[email protected]> writes: > >> I have a Telemetrum V2 and it talks to a Teledongle when in >> Pad mode. It will not talk to the Teledongle in Idle mode. >> Both Telemetrum and Teledongle have latest firmware installed. >> >> I've checked the callsign and both set to N0CALL. I've also >> tried an alternative callsign. >> I've tried with two different aerials and at different distances >> between TM and TD. >> >> I can connect over the USB serial ports to both TM and TD, >> so is there anything I can do to verify if there is a radio link >> between the TM and TD when in Idle mode? Is there anyway of >> snooping the packets so I can see why the TM is not talking >> to the TD? Anything else I can check to debug this issue? > > Know anyone nearby that you can borrow a different TeleDongle from to > try? We've had a very small number of TeleDongle units where everything > seems fine except transmitted packets are garbled somehow. So it's > *possible* that you have a TeleDongle with that problem if it was bought > this calendar year... which I think yours was? > > Bdale _______________________________________________ altusmetrum mailing list [email protected] http://lists.gag.com/mailman/listinfo/altusmetrum
