First, thanks a ton for Altos 1.4.2. I can finally install it on my Windows 8.1 machine, which means I don't have to pull out my old laptop just for this.
Related to the subject line, I had an interesting, if not a bit frustrating observation tonight. I have a TeleDongle and Telemega. I was playing around with my TeleMega on channel 9, trying to use the idle mode monitoring. I've done this before successfully (but not on channel 9), and wanted to test something unrelated out. I found the following trying to connect to the TeleMega via the TeleDongle in idle mode: In Channels 0-6, everything works fantastically In Channels 7-9, the TeleDongle is unable to connect to the TeleMega. In flight mode, the TeleMega transmits on the frequency I would expect it to normally. Not a big deal as it's still useable assuming frequencies aren't too crowded, but it's a bit odd I so I figured I'd email out about it. It also seems that the time it takes the TeleDongle to connect to the TeleMega increases as the channel # increases, but I didn't quantify it. -Andrew _______________________________________________ altusmetrum mailing list [email protected] http://lists.gag.com/mailman/listinfo/altusmetrum
