Kurt, Even the low power ones in the booster were causing the same problem with the 100mw one turned off. Once the BeeLines were turned on, nothing in the TeleMega telemetry indicated anything changed, so I'm pretty certain it's something during the startup sequence. The data post flight didn't show any interference issues like I've seen on ARTS boards previously with transmitters close by.
On Thu, Oct 9, 2014 at 3:34 PM, Kurt <[email protected]> wrote: > I woulda been scared the Telemega wouldn't perform even if you did get it > to cycle by turning it on first and then firing up the Beelines. Did you try > just > activating one of the Beelines such as the low powered ones in sequence? > They usually play well with most deployment electronics. The 100mW unit > is the one I'd have concern over. If it's Rf, your option is to shield the > Telemega > with metal. If you can apply some stick on sheeting to the inside of the > ebay and the > bulkheads that might mitigate the problem. Kurt > > _______________________________________________ > altusmetrum mailing list > [email protected] > http://lists.gag.com/mailman/listinfo/altusmetrum _______________________________________________ altusmetrum mailing list [email protected] http://lists.gag.com/mailman/listinfo/altusmetrum
