Dennis Oubre <[email protected]> writes: > I plugged the TeleBT into the Win7 Enterprise laptop this morning and > it inexplicably did what it was supposed to do. The Teledongle still > shows up in device manager under "modems" as Telemetrum and is showing > a steady red and green light.
Mysterious. You should probably try deleting the device under Windows and then reconnecting it to get Windows to re-evaluate the device. Sometimes Windows gets confused about device configurations... It's also possible that something has just happened to the TeleDongle, although I've never seen this particular failure mode before, it sure looks more like a Windows issue. > In addition, the altimeters are both still showing all red indicators > in Monitor Idle, but working perfectly in Monitor Flight. That's almost always a radio configuration issue; the AltosUI callsign has to exactly match the flight computer callsign. If not that, then make sure the antenna on the TeleBT works well, and that the two units aren't too close to each other. > Also, all this plugging/unplugging has now made the micro usb fall off > of one the altimeters. Yeah, those little connectors don't like a lot of torque on them, do they. We can repair this easily enough. -keith
signature.asc
Description: PGP signature
_______________________________________________ altusmetrum mailing list [email protected] http://lists.gag.com/mailman/listinfo/altusmetrum
