On a sort of similar note, how many amps at say, 12 volts, can you put through the outputs for say, 1/5 of a second? I can't seem to find any mention of a similar spec in the manual.
Thanks, -Andrew On Wed, Feb 4, 2015 at 6:36 PM, Keith Packard <[email protected]> wrote: > [email protected] writes: > > > Hi guys, > > one of our TeleMega devices shows a very strange behavior with its > > pyro channels Apogee and D. > > Both of them show no continuity, which means 0,00 V reading of the > > corresponding igniter voltage. > > Also, when fired manually they do nothing at all. > > I can't see any damage on neither the board nor the components. Also, > > the circuit diagram and PCB layout lets me see no direct correlation > > between the two channels. > > Has anyone experienced a similar behavior or suggestions for further > > testing (or even solutions)? > > There should be a little piece of wire connecting the 'lipo' screw > terminal to the 'pyro' screw terminal. That provides power from the main > lipo battery to all of the pyro channels. > > -- > -keith > > _______________________________________________ > altusmetrum mailing list > [email protected] > http://lists.gag.com/mailman/listinfo/altusmetrum > >
_______________________________________________ altusmetrum mailing list [email protected] http://lists.gag.com/mailman/listinfo/altusmetrum
